TeraFlex

These spacers are designed to fit with a stock configuration or with a lifted vehicle. The rear spacers and spring guide are made from polyurethane and feature TeraFlexs exclusive spring guide to help return the spring to its proper position when articulating off road. Learn More

The kit lowers the transfer case one inch to help control drive shaft vibration caused by increased ride height in excess of two inches. Details: Lowers skid plate 1" Hardware included Learn More

This weldable threaded insert makes custom link building simple and easy. Weld the insert to control arm length tubing. Weldable inserts are available to fit our large (1-1/4” 12 tpi.), medium & small (7/8” 18 tpi.) Monster ends. The large inserts require a minimum of 1.5” ID tubing and the medium/small inserts require a minimum of 1-1/8” ID tubing. Sold Individually. Details: Left hand thread 1.25" insert Requires 1.5" diameter tubing minimum Learn More

The JK Wrangler comes from the factory with a pre-determined amount of front rake (the front end sits lower than the rear about 1.5°). We have designed our front coil springs to eliminate this factory rake. This means that a lift kit after installation when measured & compared to factory measurements will be lifted more in the front than the rear, to level out the vehicle. In addition, we estimate that additional aftermarket components will be added to the vehicle (such as a winch, bumpers,... Read More Learn More

This leveling kit includes a 2 inch front spring, and a 1 inch rear spring with longer front swaybar links. this kit is perfect for leveling your JK, an adding just a bit of lift to compensate for aftermarket bumpers or full size spare. Learn More

The TeraFlex JK 1.5" Suspension Leveling Kit is perfect for leveling your JK, and adding just a touch of lift to compensate for aftermarket bumpers or full size spare. The performance enhancements of the coil springs will allow for increased off-road handling and articulation. Learn More

The TeraFlex XJ 2” Suspension Budget Boost Lift Kit is the most economical lift for the Cherokee and will increase off road performance without breaking the bank. The budget boost is designed for XJ owners who wish to lift their vehicle with the least amount of modification required. This kit includes 2" front spring spacers, and 1.75" lift rear shackles and all necessary hardware. This kit will allow you to run up to a 30” tire. Fits all XJ Cherokees 1984-2001. Includes: 2" Front Coil... Read More Learn More

TeraFlex Performance Spacer Lift Kits are the most economical way to raise your unibody Jeep SUV with the least amount of modifications. Designed to gain the maximum lift without causing premature IFS (independent front suspension) failure, these lift kits provide the perfect amount of clearance to fit larger tires for backcountry exploration without compromising factory handling and suspension control for a balanced highway ride – making them perfect for daily drivers and weekend... Read More Learn More

TeraFlex has the perfect solution to level your JK if it is dipping in the front from the weight of a winch, sagging, or to level out a loaded vehicle. These spacers are designed to work in stock configuration, or with a lifted vehicle. The spacers are available in 1/2", 1" or 2.5" lift increments depending on your needs. The rear spacer also incorporates our industry exclusive spring retainer and guide that helps to realign the spring to its proper location during extreme articulation without... Read More Learn More

The TeraFlex TJ/LJ 2” Lift Kit is the perfect way to add performance without requiring additional modifications. FITS: • TJ Wrangler • LJ Wrangler Unlimited (long-wheelbase) SPECS: • LIFT HEIGHT: 2” • MAX TIRE DIAMETER: 31 Learn More