TeraFlex

This weldable threaded insert makes custom link building simple and easy. Weld the insert to control arm length tubing. Weldable inserts are available to fit our large (1-1/4” 12 tpi.), medium & small (7/8” 18 tpi.) Monster ends. The large inserts require a minimum of 1.5” ID tubing and the medium/small inserts require a minimum of 1-1/8” ID tubing. Sold Individually. Details: Left hand thread 1.25" insert Requires 1.5" diameter tubing minimum Learn More

Just ask a passenger, when the going gets rough, what do you hold on to? These grab handles mount easily to your roll cage and give both the driver and passenger something a bit more secure to grab on to. Details: Universal application Fits 3" bar Rubber handle Heavy-duty velcro Learn More

Just ask a passenger, when the going gets rough, what do you hold on to? These grab handles mount easily to your roll cage and give both the driver and passenger something a bit more secure to grab on to. Details: Universal application Fits 4" bar Rubber handle Heavy-duty velcro Learn More

9.5" FlexArm Tube Length TeraFlex offers standard lengths of FlexArm tubing pre-tapped for our large Monster ends (1-1/4" x 12tpi threads). These can be used for custom suspension links or torque arms. The DOM tubing is 1.75" OD and .281 wall for superior strength to meet the needs of high power and torque applications. Tube length is measured as the actual length of tube. Learn More

The TeraFlex HD30 differential covers are designed to offer extreme protection from rocks, obstacles and other debris on the trail. The TeraFlex differential covers are more than 3/8in. thick. Details: For Use On Dana 25/27/30 Front Axles Cast From Thick Nodular Iron Black Powder Coat Finish Recessed Bolt Holes Equipped With Filler And Drain Plugs. Learn More

The angled rod end forging is designed for applications needing additional clearance for tires, or other frame configurations. The Flex joint ends provide excellent off-road capabilities with articulation and durability. They dampen road noise and vibration. The forging uses standard 1-1/4” x 12 tpi. with a 9/16” center bolt. 10 degree angle off joint. Used on our JK Lower Control Arms for better Tire clearance in tight turns. Shoulder width= 2-5/8” Bolt dia.= 9/16” [14mm] Shank angle =... Read More Learn More

The medium spherical urethane Monster end uses the same internals as its larger brother, in a scaled down version. The end utilizes a 7/8” x 18 tpi. shank and accepts a 7/16” bolt. Details: Right hand thread 2" shoulder width 7/8" x 18 TPI shank Accepts 7/16" bolt Shoulder Width = 2" Bolt Diameter = 12mm 7/8-18 UNS thread 1 1/4" wrench on jam nut Learn More

This tow strap is designed for those 'unlikely' situations where you have to pull out the strap - for your friend of course. The strap features a 20,000 lb. rating with red 'stress thread' for a visible warning of potential strap failure. It measures 30' long x 2", wide, with reinforced stitched loop ends. Details: Universal application 30' x 2" long Red "stress thread" for visibile warning of breakage Learn More

These air deflators are a must have for any trail vehicle. Airing down your tires increases traction and handling when off-road, but can take forever when you are in a hurry. These air deflators make the job easier so you can get out onto the trail. A key chain ring keeps them close at hand. Constructed of zinc plated steel for durability. Details: Universal application Quickly deflates tires for off roading Zinc plated steel Learn More

RockGuard D-Ring Shackle For Universal Applications RockGuard D-Ring Shackle Individual Boxed 3/4" 4.75 Ton rated Complete your bumper with these recovery D-ring shackles. The zinc plated shackles provide an attachment for connecting looped ends of straps and snatch blocks. Sold individually. Learn More