Driveshaft - Rear

New Rear Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Solid U-joints Custom made by Adams Driveshaft. Learn More

This stock replacement rear driveshaft from Omix fits 1980 Jeep CJ7 with a SR4 or T170 manual transmission. Learn More

Driveshaft, Rear, 4sp Auto Trans Learn More

Jeep JK2 and JK4 Front and Rear Rebuild Kit 2007-18 Stock Jeeps use 1 Joint on the Front Driveshaft at the transfer case; 2 Joints on the Rear Driveshaft. Learn More

1948-1971 Jeep CJ5 (CJ2a Serial # 13453 & Up) rear Drive Shaft 4 Cyl & 3 Speed Alternate Part # 906932 Learn More

Rough Country CV Drive Shaft Rear For 1987-93 Jeep Wrangler YJ (With 6" Lift) Learn More

Will only work on fixed yoke style slip yoke eliminator 1310 series yoke Spicer drive shafts and components are as good as they get. This drive shaft is compatible with the RE1811 Slip yoke eliminator kit, Atlas transfer cases and any other 1310 series CV yoke. Measurements are taken center to center on the u-joint with the slip stub at the center of it's travel. measure your vehicle on the ground in the running position to get correct length. Fits These Vehicles: 87-95 Jeep Wrangler... Read More Learn More

Rubicon Express Rear CV Driveshaft T-Case Adapter Flange 2007+ Jeep Wrangler JK 2 Door & Unlimited 4 Door Billet aluminum flange 8mm-1.25 x 25mm socket cap screws Rear transfer case flange adapter. Must be used with the following drive shaft part numbers: #RE1887-240 (2-door) and RE1887-430 (4-door). Learn More

Yukon Drive Shafts Fit 2018+ Jeep JL 4 Door Wranglers With Dana 35 (M200) Rear Axle Spicer 1310 U-Joint Size Is Suitable for Jeeps Running A Maximum Tire Size of 35" Ample Slip For Stock Wrangler Suspensions Up to 4 ½” lift, Long Arm Kits and Suspensions Over 4 ½” Will Have To Measure In Order to Verify Fitment. This Measures 45.25" from U-Joint to U-Joint Learn More

1997-06 TJ Wrangler Bare Steel Fits 3.5 - 6" lift for Mega Short SYE ONLY CV Style Custom designed drive shaft for use with our Mega Short Slip Yoke Eliminator kit. Works in combination with the Mega Short SYE on 97-06 Jeep Wranglers with a suspension lift of 3.5"to 6". Each of these double cardan CV style drive shafts replaces your single U joint drive shaft. Each drive shaft has been pre-balanced and has 3 zerk fittings for ease of lubricating. This ready to go drive shaft is a must... Read More Learn More