ADAMS DRIVESHAFT REAR 1310 CV DRIVESHAFT SOLID U-JOINTS [EXTREME DUTY SERIES] for 07-18 Jeep Wrangler JK ASDJK-1310R-S2D
SKU
ADS-ASDJK-1310R-S2D
We Price Match
- Part: Driveshaft - Rear
- Manufacturer: Adams Driveshaft
New Rear Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Solid U-joints Custom made by Adams Driveshaft.
Special Price $1,054.81 Regular Price $1,240.95
Bulk Item Surcharge: $24.95
Adams Driveshaft ASDJK-1310R-S2D
New Rear Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Solid U-joints Custom made by Adams Driveshaft.
This Rear Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1350 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
New Rear Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Solid U-joints Custom made by Adams Driveshaft.
This Rear Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1350 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Fitment:
07-18 Jeep Wrangler JK 2 Door
Features:
Made out of 2 1/2" X .095 Wall D.O.M. tubing that is more than Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
Built only with Components made by Spicer and Neapco.
Has the Strongest Solid U-joints on the Market.
Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
Parts Included:
[1] 2 1/2" X .095 Wall Heavy Duty 1310 CV Driveshaft with Solid U-joints.[1] American Made 1310 Rear Transfer Case Output Shaft Yoke.
[1] American Made 1310 Rear Dana 44 Pinion Yoke.
[1] Set of Heavy Duty 1310 U-bolts.
[1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.
Important Note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed.
Notes:
***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***
| Searchable Sku | ASDJK-1310R-S2D |
|---|---|
| Bulk Item Surcharge | $24.95 |
| Manufacturer | Adams Driveshaft |
Write Your Own Review
