MetalCloak Outboard Shock Mount Spacer Relocation Kit for 07-18 Jeep Wrangler JK, JKU 7104
SKU
MTK-7104
We Price Match
- Part: Suspension - Mounts & Brackets
- Manufacturer: MetalCloak
MetalCloak JK Outboard Front Lower Shock Mount Spacer Kit is engineered to move the lower shock mounts away from the JK Wrangler Jeep frame rails and turn shock eyelets for optimized performance.
Special Price $195.16 Regular Price $243.95
Metalcloack 7104
MetalCloak JK Outboard Front Lower Shock Mount Spacer Kit is engineered to move the lower shock mounts away from the JK Wrangler Jeep frame rails and turn shock eyelets for optimized performance.
When adding wheel travel shocks need space to move with the axle; factory shock mount locations allow the shock bodies to interfere with the Jeep frame rails and fasten the shock eyelet to go into bind instead of swing with the axle. MetalCloak's Outboard Front Lower Shock Mounts provide the needed clearance and turns the shock eyelet the correct direction to optimize performance. This is a simple bolt on kit that will improve the performance of your shocks.
MetalCloak JK Outboard Front Lower Shock Mount Spacer Kit is engineered to move the lower shock mounts away from the JK Wrangler Jeep frame rails and turn shock eyelets for optimized performance.
When adding wheel travel shocks need space to move with the axle; factory shock mount locations allow the shock bodies to interfere with the Jeep frame rails and fasten the shock eyelet to go into bind instead of swing with the axle. MetalCloak's Outboard Front Lower Shock Mounts provide the needed clearance and turns the shock eyelet the correct direction to optimize performance. This is a simple bolt on kit that will improve the performance of your shocks.
Fitment:
07-18 Jeep Wrangler JK07-18 Jeep Wrangler JK Unlimited
Features:
Driver & Passenger Lower Front Shock Mount BracketsStrong 3/16" Hot Rolled Steel Plate
Shock Mount Spacers
All Necessary Hardware for Installation
Gold Zinc Plate Protection
Made in the USA
Parts Included:
Outboard Shock Mount BracketsSpacers
All Required Hardware
Notes:
Note: The JK outboard front lower shock mount spacer kit is for stock axle application only.
Note: If using OE wheels 2" spacers will be needed to give proper clearance. These mounts are intended for use for wheels with 4.5" of backspacing or less or an equivalent of a 2" spacer on factory wheels.
Note: The JK outboard front lower shock mount spacer kit may come with either hex head or button head hardware.
| Searchable Sku | 7104 |
|---|---|
| Bulk Item Surcharge | $0.00 |
| Manufacturer | MetalCloak |
Write Your Own Review
