MetalCloak HD Control Arm Pro'lignment Kit for 07-18 Jeep Wrangler JK, JKU 7073
SKU
MTK-7073
We Price Match
- Part: Suspension - Control Arms
- Manufacturer: MetalCloak
MetalCloak's Jeep JK Wrangler Control Arm Pro'lignment Kit corrects the control arm angle and caster for 2.5", 3.5", and 4.5" lift heights.
Special Price $384.76 Regular Price $480.95
Metalcloack 7073
MetalCloak's Jeep JK Wrangler Control Arm Pro'lignment Kit corrects the control arm angle and caster for 2.5", 3.5", and 4.5" lift heights. Brackets allows the use of factory/non-adjustable control arms or aftermarket adjustable control arms.
Improve the drivability in you lifted Jeep by reducing the angle of your control arms AND correct the caster issues if using factory control arms. The gusseted, solid-welded, 1 piece 3/16" hot rolled steel plate brackets insure strength where you need it.
Multiple hole locations for control arms allow use on lift heights from 2.5" to 4.5" even if re-using factory control arms; this works great with aftermarket control arms also to flatten the angle. Bolts into factory locations for ease of installation and is gold zinc plated for a durable, long lasting finish.
MetalCloak's Jeep JK Wrangler Control Arm Pro'lignment Kit corrects the control arm angle and caster for 2.5", 3.5", and 4.5" lift heights. Brackets allows the use of factory/non-adjustable control arms or aftermarket adjustable control arms.
Improve the drivability in you lifted Jeep by reducing the angle of your control arms AND correct the caster issues if using factory control arms. The gusseted, solid-welded, 1 piece 3/16" hot rolled steel plate brackets insure strength where you need it.
Multiple hole locations for control arms allow use on lift heights from 2.5" to 4.5" even if re-using factory control arms; this works great with aftermarket control arms also to flatten the angle. Bolts into factory locations for ease of installation and is gold zinc plated for a durable, long lasting finish.
Fitment:
07-18 Jeep Wrangler JK07-18 Jeep Wrangler JK Unlimited
Features:
Flattened Control Arm AnglesCorrected Caster
Improved Braking Performance
3/16" Hot Rolled Steel Plate
Fully Welded 1 Piece Design
Gusseted And Boxed-In For Strength
Gold Zinc Plated
All Hardware Needed
Bolts Directly Into Factory Location
Made in the USA
Parts Included:
Control Arm Pro'lignment BracketsBracket Spacers
All Required Hardware
Important Note: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.
| Searchable Sku | 7073 |
|---|---|
| Bulk Item Surcharge | $0.00 |
| Manufacturer | MetalCloak |
Write Your Own Review
