Dynatrac ProGrip Performance Brake Kit For 2007-18 Jeep Wrangler JK 2 Door & Unlimited 4 Door Models JK44-2X1125-A
SKU
DYN-JK44-2X1125-A
We Price Match
- Manufacturer: Dynatrac
- Part: Brakes - Kits
Dynatrac is setting a new standard in brake upgrades for the Jeep Wrangler JK with the introduction of its ProGrip Brake System, designed to provide a significant braking improvement during off-roading and daily-driving experiences as well as in emergency stops.
13.50-inch front rotors with unique pillar-vented cooling design.
14.25-inch rear rotors with integral parking brake surface.
13.50-inch front rotors with unique pillar-vented cooling design.
14.25-inch rear rotors with integral parking brake surface.
Special Price $1,924.36 Regular Price $2,263.95
Bulk Item Surcharge: $66.95
Dynatrac JK44-2X1125-A
Dynatrac is setting a new standard in brake upgrades for the Jeep Wrangler JK with the introduction of its ProGrip Brake System, designed to provide a significant braking improvement during off-roading and daily-driving experiences as well as in emergency stops. The Dynatrac ProGrip Brake System comes with larger rotors for the front and rear, providing improved braking by moving the factory calipers farther from the axle centerline. The increased rear braking power provides balanced braking, reducing nose dive and dramatically improving the control of the vehicle in mild and hard braking conditions compared to upgrades that only address the front brakes. Significant research was done to select the optimum front and rear brake-pad linings to balance the system and provide additional stopping power.
Fully instrumented testing showed lower brake pedal pressure and a reduction in stopping distances of up to 30 percent compared to stock brakes on a Jeep JK outfitted with a 4-inch lift and 37-inch-tall tires. Measured G-force during moderate braking (1,000-psi brake fluid pressure) increased from 0.48 Gs with stock brakes to 0.63 Gs with the Dynatrac ProGrip system. Another key advantage is that installation of the system does not require opening the brake hydraulics, thus avoiding the chore of bleeding the brakes after installation. Additionally, brake pedal feel and travel is improved after upgrading to the Dynatrac ProGrip Brake System.
The Dynatrac ProGrip Brake System fits Jeep Wranglers with 17-inch wheels (wheel spacers are required with 17-inch factory wheels), and the system will fit in nearly all aftermarket wheels without spacers.
Dynatrac is setting a new standard in brake upgrades for the Jeep Wrangler JK with the introduction of its ProGrip Brake System, designed to provide a significant braking improvement during off-roading and daily-driving experiences as well as in emergency stops. The Dynatrac ProGrip Brake System comes with larger rotors for the front and rear, providing improved braking by moving the factory calipers farther from the axle centerline. The increased rear braking power provides balanced braking, reducing nose dive and dramatically improving the control of the vehicle in mild and hard braking conditions compared to upgrades that only address the front brakes. Significant research was done to select the optimum front and rear brake-pad linings to balance the system and provide additional stopping power.
Fully instrumented testing showed lower brake pedal pressure and a reduction in stopping distances of up to 30 percent compared to stock brakes on a Jeep JK outfitted with a 4-inch lift and 37-inch-tall tires. Measured G-force during moderate braking (1,000-psi brake fluid pressure) increased from 0.48 Gs with stock brakes to 0.63 Gs with the Dynatrac ProGrip system. Another key advantage is that installation of the system does not require opening the brake hydraulics, thus avoiding the chore of bleeding the brakes after installation. Additionally, brake pedal feel and travel is improved after upgrading to the Dynatrac ProGrip Brake System.
The Dynatrac ProGrip Brake System fits Jeep Wranglers with 17-inch wheels (wheel spacers are required with 17-inch factory wheels), and the system will fit in nearly all aftermarket wheels without spacers.
Fitment:
Fits 2007-18 Jeep Wrangler (JK)Fits 2007-18 Jeep Wrangler Unlimited (JK)
Features:
Measured G-force during moderate braking (1,000-psi brake fluid pressure) increased from 0.48 Gs with stock brakes to 0.63 Gs with the Dynatrac ProGrip system.Another key advantage is that installation of the system does not require opening the brake hydraulics, thus avoiding the chore of bleeding the brakes after installation. Additionally, brake pedal feel and travel is improved after upgrading to the Dynatrac ProGrip Brake System.
The Dynatrac ProGrip Brake System fits Jeep Wranglers with 17-inch wheels (wheel spacers are required with 17-inch factory wheels), and the system will fit in nearly all aftermarket wheels without spacers.
For over 25 years, Dynatrac has been the industry leader in high-performance axle and drivetrain assemblies. Dynatrac products are designed using the finest materials, processes and engineering available, and its products are backed by the best service and warranty in the business. From complete replacement ProRock axle assemblies to high-quality replacement and upgrade components, Dynatrac is committed to delivering the best performance, reliability and quality possible.
13.50-inch front rotors with unique pillar-vented cooling design.
14.25-inch rear rotors with integral parking brake surface.
Stronger caliper brackets designed using CAD/FEA and advanced engineering tools.
Unique front and rear brake pads for optimum friction performance.
Wheel Requirements: - 17" or larger - 4.75" Backspace or less or - OEM Rubicon wheel with 1.50" spacer
Parts Required:
Includes 4 brake rotors, caliper brackets and brake pads for all 4 cornersReduce stopping distance by 30%
System improves brake pedal feel and reduces pedal travel needed for optimum braking
Stronger caliper brackets designed using CAD/FEA and advanced engineering tools
Unique front and rear brake pads for optimum friction performance
Works with 17 inch aftermarket wheels, factory 17 inch wheels require wheel spacers
| Manufacturer | Dynatrac |
|---|---|
| Searchable Sku | JK44-2X1125-A |
