Adams Driveshaft Rear 1310 CV Driveshaft [HEAVY DUTY SERIES] Greasable U-joints for 07-18 Jeep Wrangler JK 2 Door ASDJK-1310R-G2D
SKU
ADS-ASDJK-1310R-G2D
We Price Match
- Part: Driveshaft - Rear
- Manufacturer: Adams Driveshaft
New Rear Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Greasable U-joints Custom made by Adams Driveshaft.
Special Price $1,061.61 Regular Price $1,248.95
Bulk Item Surcharge: $24.95
Adams Driveshaft ASDJK-1310R-G2D
New Rear Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Greasable U-joints Custom made by Adams Driveshaft.
This Rear Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1310 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.
New Rear Heavy Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with Greasable U-joints Custom made by Adams Driveshaft.
This Rear Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1310 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.
Fitment:
07-18 Jeep Wrangler JK 2 Door
Features:
2 Door Driveshaft: Part# ASDJK-1310R-G2D 4 Door Driveshaft: Part# ASDJK-1310R-G4DMade out of 2 1/2" X .083 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
Built only with Components made by Spicer and Neapco.
Has Greaseable U-joints not Offshore U-joints with different color Seals.
Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
Parts Included:
[1] 2 1/2" X .083 Wall Heavy Duty 1310 CV Driveshaft with Greaseable U-joints.[1] American Made 1310 Rear Transfer Case Output Shaft Yoke.
[1] American Made 1310 Rear Dana 44 Pinion Yoke.
[1] Set of Heavy Duty 1310 U-bolts.
[1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.
Important Note: If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed
Notes:
***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***
| Searchable Sku | ASDJK-1310R-G2D |
|---|---|
| Bulk Item Surcharge | $24.95 |
| Manufacturer | Adams Driveshaft |
Write Your Own Review
