TeraFlex

The TeraFlex JK/JKU fixed-length 4-Arm Sport Flexarm Kit (2.5-3” lift) provides maintenance-free and dependable performance on JK Wrangler and JKU Wrangler Unlimited models with 2.5-3” lifts. Can be added to any existing suspension lift. Learn More

TeraFlex JK/JKU Adjustable Alpine Flexarms (2-4” Lift) provide maximum adjustability, dependability, and performance while retaining factory control arm mounting locations on JK Wrangler and JKU Wrangler Unlimited models with 2-4” lifts. Can be added to any existing suspension lift. Learn More

TeraFlex JK: Alpine Short Control Arms provide complete alignment adjustability and dependability for maximum performance on JK Wrangler/Unlimited models with 2-4" lifts. Learn More

Are you tired of your control arms always coming out of adjustment? Stop the constant axle misalignment. These FlexArm cam-bolt washers are designed to fit into the OEM spot for the cam-bolt adjusters. These washers prevent the FlexArm bolt from potential movement by locking the position of the bolt. Designed for Front Lower and Rear Upper Arm mounts. Includes: Cam Bolt Washers - Eight Learn More

FlexArm, Long Upper, Front (PRO LCG), Monster Style Min Length = 22-1/2" Max Length = 24 7/8" Uses 7/16" [12mm] Bolt 7/8-18 UNS Thread 1 1/8" Wrench On Tube 1 1/4" Wrench On Jam Nut Details: Front Upper Adjustable Monster Flex Control Arms Greasable Monster Flex Joints Finish: Black Powder Coated Sold As: Pair Learn More

TeraFlex Flex Ends will allow some misalignment when articulating, and have a specially designed urethane bushing to restrict excess movement and allow control and handling at highway speeds. Details: Left hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

Used as replacement in Teraflex 1615700 Monster Lower FlexArms for 84-06 Jeep Cherokee XJ, Comanche MJ, Grand Cherokee ZJ & WJ, Wrangler TJ & Unlimited Details: Right hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

When a quiet street ride and vibration free driving are required, the rubber bushing ends will give you the feel you want. The rubber bushing will provide the most noise and vibration dampening characteristics possible. This end can also be used as a replacement for any control arm utilizing a 1-1/4” x 12 tpi. ‘heim’ type rod end. Uses a 9/16” bolt. LEFT Hand Thread. Details: Left hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

The angled rod end forging is designed for applications needing additional clearance for tires, or other frame configurations. The end utilizes a 7/8” x 18 tpi. shank and accepts a 9/16” bolt. The TJ Wrangler version features a 2" wide shoulder width while the JK version comes with a standard 2-5/16" shoulder width. Details: Right hand thread 9 degree angle 2-5/16" shoulder width 7/8" x 18 TPI shank Accepts 9/16" bolt Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More