TeraFlex

The coilover builders kits are packaged for those that wish to use front and rear coilovers. Learn More

Fits Ford 9", 8.8",and custom TeraFlex housings using the Big Ford New Style housing ends. Learn More

TJ Rear Axle Upper FlexArm Mount- Passenger Details: FlexArm Mount Passenger Side Rear Upper Learn More

TeraFlex DOT approved stainless steel braided brake lines are designed for JK applications. These stainless line kits will prevent line expansion, thereby giving a much firmer-feeling pedal. All brake lines measure longer than stock for additional brake line length. All stainless brake lines are made to MVSS-1006 specifications. This complete TJ kit comes with two front 26" brakelines, and one rear 26" brakeline. Learn More

TeraFlex TJ/LJ | ZJ | XJ Adjustable Front Track Bar Kit to fine tune your front suspension and eliminate bump steer. The track bar bushing adds adjustability, improves durability, and reduces the effects of front wheel shimmy. Learn More

The TeraFlex HD30 differential covers are designed to offer extreme protection from rocks, obstacles and other debris on the trail. The TeraFlex differential covers are more than 3/8in. thick. Details: For Use On Dana 25/27/30 Front Axles Cast From Thick Nodular Iron Black Powder Coat Finish Recessed Bolt Holes Equipped With Filler And Drain Plugs. Learn More

These TeraFlex TJ/LJ Heavy-Duty Large Taper Tie Rod Ends utilize a one-ton joint end and a large taper rod end to fit a standard Dana 60 front axle or a Tera CRD60 axle. Learn More

The TeraFlex TJ high steer trackbar kit is designed to be used in conjunction with our high steer kit. This kit will allow you to fine tune the drag link & trackbar angles to eliminate and correct bumpsteer or other front end issues. The kit includes an upper frame bracket, lower axle bracket, and adjustable trackbar. Both brackets feature multiple mounting holes to fine tune for lift height and trackbar position. This kit is designed to put the trackbar parallel with the drag link. This kit... Read More Learn More

The angled rod end forging is designed for applications needing additional clearance for tires, or other frame configurations. The Flex joint ends provide excellent off-road capabilities with articulation and durability. They dampen road noise and vibration. The forging uses standard 1-1/4” x 12 tpi. with a 9/16” center bolt. 10 degree angle off joint. Used on our JK Lower Control Arms for better Tire clearance in tight turns. Shoulder width= 2-5/8” Bolt dia.= 9/16” [14mm] Shank angle =... Read More Learn More

Large Rod End Field Repair Tool This repair tool will make joint rebuilding in the field as simple as it gets. This in fact is the same tool that we use in house to rebuild joints. The repair tool is easy to use with two open end wrenches, or sockets. Learn More