Steering - Upgrades

1972-83 CJ Narrow Track These Tie Rod Assemblies provide virtually 1-ton strength with factory tapered ends, so no modification is required. The tube is 1.25" OD SAE steel with .25" wall thickness. This is the perfect solution for preventing bent tie rod tubes from off roading with larger tires. Complete kits with dust shields, castle nuts, cotter pins, jamb nuts and zerk fittings. Learn More

Rugged Ridge Inverted Drag Link For 2007+ Jeep Wrangler & Wrangler Unlimited JK NOTE: a 13/16" drill bit required for installation Includes: Drag Link Learn More

THIS IS FOR THE RUBICON|MAX-TOW|4XE|HIGH ALTITUDE|MOJHAVE|392 EDITIONS ONLY! Chromoly Dog-Legged Tie Rod for the Rubicon JL Wrangler/JT Gladiator is strength with style for your vulnerable steering system. Learn More

HD Game Changing Drag Link for the JL Wrangler / JT Gladiator is manufactured of strong Tubular Alloy Steel providing unprecedented strength and is fitted with MetalCloak's oversized anti-flop 1-ton rod ends. Learn More

The MetalCloak JK Wrangler Hi-Steer kit provides a new drag-link that is placed on top of the steering knuckle and comes with a relocation bracket that raises the track bar to eliminate bump steer in your Jeep JK that is lifted 4.5 inches or more. Learn More

MetalCloak JK Track Bar & Stabilizer Relocation Bracket is designed to to correct steering geometry when lifting your vehicle 4.5 inches or more to match angles of a Drag Link flip kit. Learn More

The BIG BORE XD-JK with Cylinder Assist™ Ports is the most powerful and strongest replacement steering gear on the market for the Jeep JK. Learn More

When using the OE hose assembly, a stock or PSC upgraded power steering pump will often experience excessive system temperatures and can result in destructive fluid boiling. Learn More

Tera has developed heavy duty tie rod ends that utilize a one-ton joint end, and are available in either a stock Jeep taper or a large one-ton taper (standard Dana 60). The stock taper rod ends will fit Dana 30 knuckle holes. The large taper will fit the larger 60 type knuckles, as are used in Tera"™s HD axle line. Additionally the tie rod ends are available with an offset (for use with applications where differential interference may occur with the tie rod). Details: Left hand thread Small... Read More Learn More

The TeraFlex high steer system was originally designed to be used with our top of the line suspension system- the MAX-LCG, which utilizes a front 4-link triangulation (eliminating the trackbar). The High Steer Kit is essential in that application. We found that many Jeeps with more than 4" of lift while still utilizing a trackbar system would benefit from a high steer solution. This kit will beef up the essential steering components of your Dana 30 front axle. The system includes a HD tie rod... Read More Learn More