Suspension - Control Arms

The angled rod end forging is designed for applications needing additional clearance for tires, or other frame configurations. The Flex joint ends provide excellent off-road capabilities with articulation and durability. They dampen road noise and vibration. The forging uses standard 1-1/4” x 12 tpi. with a 9/16” center bolt. 10 degree angle off joint. Used on our JK Lower Control Arms for better Tire clearance in tight turns. Shoulder width= 2-5/8” Bolt dia.= 9/16” [14mm] Shank angle =... Read More Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More

The medium spherical urethane Monster end uses the same internals as its larger brother, in a scaled down version. The end utilizes a 7/8” x 18 tpi. shank and accepts a 7/16” bolt. Details: Right hand thread 2" shoulder width 7/8" x 18 TPI shank Accepts 7/16" bolt Shoulder Width = 2" Bolt Diameter = 12mm 7/8-18 UNS thread 1 1/4" wrench on jam nut Learn More

Rear Upper Sport FlexArm Kit For 2007+ Jeep Wrangler JK 2 Door & Unlimited 4 Door Models With 2.5" - 3" Lift Premium black e-dipped coating Pre-adjusted length arms correct caster and pinion angle 1-5/8" x 0.156 wall DOM tubing Sold as a pair TeraFlex sport fixed-length flexarms are designed to offer maintenance free performance for 2.5" - 3" lift. Pre-adjusted length arm corrects caster and pinion angle for 2.5" - 3" lift kits. 1-5/8" x 0.156 wall DOM tube stands up to trail abuse and... Read More Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More

The medium spherical urethane Monster end uses the same internals as its larger brother, in a scaled down version. The end utilizes a 7/8” x 18 tpi. shank and accepts a 7/16” bolt. Details: Left hand thread 2" shoulder width 7/8" x 18 TPI shank Accepts 7/16" bolt Shoulder Width = 2" Bolt Diameter = 12mm 7/8-18 UNS thread 1 1/4" wrench on jam nut Learn More

TeraFlex JK FlexArms can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement. Details: Lower control arms Pinion and caster adjustment Sold In Pairs Factory Length = 20-5/16" Min Length = 19-7/8" Max Length = 22-1/16" Uses 9/16" [14mm] Bolt 1 1/4-12 UNF Thread 1 1/2" Wrench On Tube 1 7/8" Wrench On Jam Nut Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More

TeraFlex sport fixed-length flexarms are designed to offer maintenance free performance for 2.5" - 3" lift. Learn More

The TeraFlex JK/JKU fixed-length 4-Arm Sport Flexarm Kit (2.5-3” lift) provides maintenance-free and dependable performance on JK Wrangler and JKU Wrangler Unlimited models with 2.5-3” lifts. Can be added to any existing suspension lift. Learn More