Air Compressors

Only Vehicle Specific Bolt-On Onboard Air System Available Direct Fit Mounting Brackets – Made in the USA No Drilling or Modifications required – 100% Bolt-On Installation Complete Wiring including 30-Amp Relay Remote Quick Disconnect Tire Inflator with Digital Pressure Gauge and Storage Bag Included Model 6450RC – High Output 150 PSI Waterproof Air Compressor 2.8 Gallon Air Tank – Made in the USA Able to Power Air Horns, Air Lockers, inflate Up To... Read More Learn More

Designed to mount an onboard air tank conveniently out of the way utilizing free space under the rear floor of the Jeep. No cutting or component removal is required. Compatible with AccuAir's ENDO-Tank™ with integrated valves and integrated compressor. Learn More

M.O.R.E. has done it again! They teamed up with ARB and designed a mounting bracket to fit under your hood to mount your ARB CKMTA12 Twin Motor/Dual Cylinder On-Board Air Compressor Learn More

For direct use with an air tank. Features: - 1/4" (M) NPT Swivel - Clip-On Tire Chuck - Hose Rated to 200 PSI Learn More

VIAIR’s Medium Duty Onboard Air System is a pre-packaged compressed air solution that provides a 33% duty cycle 325C compressor, 2.5 gallon air tank, and all components needed to install basic vehicle-based pneumatics. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs. Included Parts: - 2.5 Gallon VIAIR Air Tank - 325C VIAIR... Read More Learn More

VIAIR’s Heavy Duty Onboard Air System is a pre-packaged compressed air solution that provides a faster 33% duty cycle 400C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires right out of the box. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs. Included Parts: - 2.5... Read More Learn More

VIAIR’s Super Duty Onboard Air System is a pre-packaged compressed air solution that provides two fast 325C, 33% duty cycle compressors, a 2.0 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for... Read More Learn More

150 PSI Air Source Kits come with a powerful, 30% duty cycle, 280C VIAIR compressor mounted on a 150 PSI-rated 2.0 gallon air tank with 5 ports. All Air Source kits come with a pre-wired pressure switch (P/N 20005 / 110-150 PSI). The 150 PSI Air Source Kit comes complete with a 1/4" NPT brass drain cock, 1/4" NPT ASME coded and certified safety valve, 1/2" NPT port compression fitting for 3/8" (I.D.) air line pre-installed. To use, simply connect the pressure switch to fused power, make a solid... Read More Learn More

Fast-Fill 200 PSI Air Source Kits come with a powerful, low amp-draw 380C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industry’s leading 200 PSI compressors but also come with a drain cock, safety valve, 1/2-inch port compression fitting for 3/8" (I.D.) air line pre-installed! To use, simply connect the pressure switch to fused power, make a solid... Read More Learn More

High-Flow 200 PSI Air Source Kits come with a powerful, low amp-draw 480C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industry’s leading 200 PSI compressors but also come with a drain cock, safety valve, 1/2-inch port compression fitting for 3/8" (I.D.) air line pre-installed! To use, simply connect the pressure switch to fused power, make a solid... Read More Learn More