Air Compressors

A good air compressor is a must have for every off road enthusiast. Whether you are running ARB Air Lockers or re-inflating your tires after a day of wheeling, an ARB High Output OnBoard Air Compressor has you covered. ARB designed this OnBoard Air system for ease of use, and includes all wiring and hardware that is required to set up this compressor. This is a universal kit and is compatible with all Jeep and 4x4 applications. Once installed, you will be able to actuate your air lockers,... Read More Learn More

Features a normally-closed air chuck that can be opened by pressing the lever on the inflation gun. Because this air chuck is normally closed, the Tire Inflation Gun is a perfect compliment to onboard air systems and VIAIR’s line of “Portable Automatic” compressors. Learn More

85P is a small portable compressor with a built-in LED work light, capable of inflating up to 31-inch tires by simply plugging into your cigarette lighter power port (15 amps max.). Connect the screw-on tire chuck to a tire valve stem before turning the unit on. Tire pressure can be monitored using the gauge incorporated into the top of the unit. Please Note: Always check your vehicle's power port rating for maximum amperage before ordering. The 85P does not work with Presta bicycle... Read More Learn More

400P-Automatic is VIAIR’s first Automatic shut-off function portable compressor. This 33% duty cycle unit is capable of pressures up to 150 PSI and can be operated for up to 40 minutes at a time before needing to be rested (at up to 40 PSI). The 400P-Automatic comes with a close-ended gas station-style air gun for added convenience. Portable compressors with automatic shutoff come into play when moving from tire to tire, and when checking tire pressure in the middle of a tire fill. A typical... Read More Learn More

This kit is for use with the VIAIR 2-1/2 gal. Air Tank if you are not using air lockers. Kit contains two 1/4" plugs, one drain petcock, one 1/4" compression fitting, and one 175 PSI rated safety valve. For use with the VIAIR 2-1/2 gallon tank, when not using air lockers Kit contains two 1/4" plugs, one drain petcock, one 1/4" compression fitting and one 175 PSI rated safety valve Learn More

VIAIR tanks are internally coated for corrosion resistance. All VIAIR tanks are SAE J-10 self-compliant. Max Pressure: 150 PSI Four 1/4" NPT Ports Dimensions: 10.25" L x 6" W x 7.5" H Rust Resistant Coating Mounting Hardware Included Learn More

All Viair tanks are SAE J10 certified and rated to either 150 or 200 PSI maximum working pressure and equipped with either 1/4' or 3/8" NPT ports in various configurations. All air tanks are coated to resist rusting and oxidation. Max Pressure: 200 PSI Six 1/4" NPT Ports Dimensions: 23.5" L x 6" W x 7.5" H Rust Resistant Coating Mounting Hardware Included Learn More

Who wants a noisy compressor mounted inside the cab? Learn More

For direct use with an air tank. Features: - 1/4" (M) NPT Swivel - Clip-On Tire Chuck - Hose Rated to 200 PSI Learn More

VIAIR’s Medium Duty Onboard Air System is a pre-packaged compressed air solution that provides a 33% duty cycle 325C compressor, 2.5 gallon air tank, and all components needed to install basic vehicle-based pneumatics. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs. Included Parts: - 2.5 Gallon VIAIR Air Tank - 325C VIAIR... Read More Learn More