Jeep Part Sales

Features Fully-adjustable Alpine Flexarm control arms that give precise and commanding driving position with attention to pinion & caster angles. The heavy-duty Control arms will correct sag and sway for a proper suspension alignment. They require zero maintenance, and are easy to install. Sold as a set of (8) and carry a limited lifetime warranty. Learn More

Alpine IR Short Control Arms provide complete alignment adjustability and dependability for maximum performance on JL Wrangler/Unlimited & Gladiator JT models with 0–4.5" lifts. Learn More

The JL control arm bolts can become damaged over time due to the extreme torque specs required by the Factory specifications, and even stretched after with repeated removal and installation. Learn More

Rear Upper Sport FlexArm Kit For 2007+ Jeep Wrangler JK 2 Door & Unlimited 4 Door Models With 2.5" - 3" Lift Premium black e-dipped coating Pre-adjusted length arms correct caster and pinion angle 1-5/8" x 0.156 wall DOM tubing Sold as a pair TeraFlex sport fixed-length flexarms are designed to offer maintenance free performance for 2.5" - 3" lift. Pre-adjusted length arm corrects caster and pinion angle for 2.5" - 3" lift kits. 1-5/8" x 0.156 wall DOM tube stands up to trail abuse and... Read More Learn More

Replace or repair your used FlexArm bushings and sleeves. This kit is designed to repair one arm. Bushings are made from polyurethane, and sleeves are steel. Details: Lower FlexArm Includes Bushings and Sleeves Each Learn More

TJ Rear Axle Upper FlexArm Mount- Passenger Details: FlexArm Mount Passenger Side Rear Upper Learn More

The angled rod end forging is designed for applications needing additional clearance for tires, or other frame configurations. The Flex joint ends provide excellent off-road capabilities with articulation and durability. They dampen road noise and vibration. The forging uses standard 1-1/4” x 12 tpi. with a 9/16” center bolt. 10 degree angle off joint. Used on our JK Lower Control Arms for better Tire clearance in tight turns. Shoulder width= 2-5/8” Bolt dia.= 9/16” [14mm] Shank angle =... Read More Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More

Replacement TeraFlex TJ: Small Adjustable Control Arm/Track Bar Joint. Right-hand thread. Fits frame end or axle end depending on application. Learn More

TeraFlex JT: Alpine Long Arms and Long Arm Brackets provide complete alignment adjustability and dependability for maximum performance on JT Gladiator models with 3 to 6 Inch lifts. Learn More

Teraflex Brackets are only compatible for JK/JKU Adjustable Alpine Front Long Flexarm & Rear Stretch Kits Learn More

TeraFlex sport fixed-length flexarms are designed to offer maintenance free performance for 2.5" - 3" lift. Learn More

The TeraFlex JK/JKU fixed-length 4-Arm Sport Flexarm Kit (2.5-3” lift) provides maintenance-free and dependable performance on JK Wrangler and JKU Wrangler Unlimited models with 2.5-3” lifts. Can be added to any existing suspension lift. Learn More

TeraFlex JK/JKU Adjustable Alpine Flexarms (2-4” Lift) provide maximum adjustability, dependability, and performance while retaining factory control arm mounting locations on JK Wrangler and JKU Wrangler Unlimited models with 2-4” lifts. Can be added to any existing suspension lift. Learn More

TeraFlex JK: Alpine Short Control Arms provide complete alignment adjustability and dependability for maximum performance on JK Wrangler/Unlimited models with 2-4" lifts. Learn More

The TeraFlex TJ complete 8 FlexArm kit can be added to any existing suspension lift. Learn More

Upgrade your current lift kit with the advantages of long arm performance. The upgrade includes control arm bracketry, and our heavy duty Monster end assemblies with 1.75” DOM arms. The control arm bracketry allows for easy installation. Details: Rear Upper Includes Brackets Hardware For Use with LCG 4 Link System Pair Min Length = 31-9/16" Max Length = 36-3/16" Uses 9/16" [14mm] Bolt 1 1/4-12 UNF Thread 1 1/2" Wrench On Tube 1 7/8" Wrench On Jam Nut Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap... Read More Learn More

Replacement TeraFlex TJ: Small Adjustable Front Track Bar Joint. Frame End. Learn More

TeraFlex set the standard in Wrangler performance with the adjustable FlexArm that offered performance features never before seen. Learn More

TeraFlex set the standard in Wrangler performance with the adjustable FlexArm that offered performance features never before seen. Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More

Alpine IR Short Control Arms provide complete alignment adjustability and dependability for maximum performance on JK Wrangler/Unlimited models with 2-4" lifts Learn More

NC Cut From 1/4 Inch Steel, And Precision Bent Learn More

The Teraflex Alpine IR Adjustable Control Arm Kit gives you the ability to adjust the alignment in your Jeep Gladiator JT with a lift up to 4.5". Learn More

These TeraFlex JL / JT: Front Control Arm Sport Frame Brackets are a must to correct caster angles and restore factory geometry on JL Wrangler/Unlimited models with 2.5-4.5" lift kits and JT Gladiator models with 3.5-4.5" lift kits. Additionally these Sport Frame Brackets reduce brake dive and improve overall ride quality resulting in a smoother ride. Install these bolt-on brackets between the factory frame mounts and the stock front upper and front lower control arms. Can also be used... Read More Learn More

These heavy-duty control arms are fully adjustable, and are engineered to reduce noise, vibration, and harshness (NVH). The ultimate off-road articulation and ride comfort. They require zero maintenance, and are easy to install and are available for both front and rear lower options. Learn More

TeraFlex JL/JLU/JT: Front Lower Sport Control Arms provide maintenance-free and dependable performance on models with 1.5-3.5” lifts. Bolts to the factory control arm mounting locations. Can be added to any existing suspension lift. Sold in pairs with bushings installed. Learn More

If you’ve just installed a Pair of TeraFlex Front Control Arm Relocation Brackets on your lifted Jeep Wrangler, then you’re going to need to pick up this Pair of TeraFlex Front Control Arm Relocation Support Brackets to keep your new Sport brackets from bending or breaking! For use w/ Front Control Arm Sport Frame Bracket Kit (# 1938125) Learn More

TeraFlex JL: Alpine IR Short Control Arms provide complete alignment adjustability and dependability for maximum performance on JL Wrangler/Unlimited models with 0–4.5" lifts. Learn More

Alpine IR Short Control Arms provide complete alignment adjustability and dependability for maximum performance on JL Wrangler/Unlimited models with 0–4.5” lifts. Learn More

Are you tired of your control arms always coming out of adjustment? Stop the constant axle misalignment. These FlexArm cam-bolt washers are designed to fit into the OEM spot for the cam-bolt adjusters. These washers prevent the FlexArm bolt from potential movement by locking the position of the bolt. Designed for Front Lower and Rear Upper Arm mounts. Includes: Cam Bolt Washers - Eight Learn More

FlexArm, Long Upper, Front (PRO LCG), Monster Style Min Length = 22-1/2" Max Length = 24 7/8" Uses 7/16" [12mm] Bolt 7/8-18 UNS Thread 1 1/8" Wrench On Tube 1 1/4" Wrench On Jam Nut Details: Front Upper Adjustable Monster Flex Control Arms Greasable Monster Flex Joints Finish: Black Powder Coated Sold As: Pair Learn More

TeraFlex Flex Ends will allow some misalignment when articulating, and have a specially designed urethane bushing to restrict excess movement and allow control and handling at highway speeds. Details: Left hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

Used as replacement in Teraflex 1615700 Monster Lower FlexArms for 84-06 Jeep Cherokee XJ, Comanche MJ, Grand Cherokee ZJ & WJ, Wrangler TJ & Unlimited Details: Right hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

When a quiet street ride and vibration free driving are required, the rubber bushing ends will give you the feel you want. The rubber bushing will provide the most noise and vibration dampening characteristics possible. This end can also be used as a replacement for any control arm utilizing a 1-1/4” x 12 tpi. ‘heim’ type rod end. Uses a 9/16” bolt. LEFT Hand Thread. Details: Left hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

JK Small Rear Upper Offset Adjustable Control Arm Joint – Right Hand Thread Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More

Rear Upper Long FlexArm Single For 2004-06 Jeep Wrangler TJ Unlimited Models Allows custom pinion and caster angles Sold individually The TeraFlex TJ rear upper FlexArm can be added to any existing TeraFlex Pro LCG suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable TJ rear upper FlexArm. Learn More

Longer wheel base vehicles have an advantage off road. Learn More

TeraFlex JT: Alpine IR Long Arms and Long Arm Brackets provide complete alignment adjustability and dependability for maximum performance on JT Gladiator models with 3 to 6 Inch lifts. Learn More

Alpine IR Control Arms provide complete alignment adjustability for maximum performance on JL Or JLU Wrangler models with 0 to 4.5 Inch lifts. Uses factory control arm brackets. Learn More

The Monster short arm system is designed for short arm applications looking for heavy duty performance. This kit comes with front and rear lower Monster FlexArms, a steering box skid plate, and front swaybar disconnects. This kit will also enhance the performance of lifts (up to 3” of lift) from other manufacturers. Fits all Wrangler models including the Rubicon and Unlimited. NOTE: This short arm system kit is designed for suspension lifts up to 3”. Details: Lower Monster Flex Control... Read More Learn More

The TeraFlex is designed as an upgrade to a current suspension system. You get the same advantage and benefits of a long arm system without all of the cost from purchasing parts that you already own and have installed. The Long Arm Upgrade Kit comes with all frame brackets, upper and lower long flexarms, and necessary hardware. Track bar brackets, and adjustable track bars are not included, but can be ordered separately. Details: Monster FlexArm Kit Long Rear Upper Flexarm Incl.... Read More Learn More

We set the standard in Wrangler performance with our adjustable FlexArm that offered performance features never before seen. We have now delivered the next generation of control arms and components with our Monster Series HD Rod Ends. We designed a superior FlexArm that addressed and solved some of the limitations of our original FlexArm. The new Monster FlexArm offers superior tubing strength and the largest interchangeable and rebuildable ends ever. Details: Monster series heavy-duty rod... Read More Learn More

When a quiet street ride and vibration free driving are required, the rubber bushing ends will give you the feel you want. The rubber bushing will provide the most noise and vibration dampening characteristics possible. This end can also be used as a replacement for any control arm utilizing a 1-1/4” x 12 tpi. ‘heim’ type rod end. Uses a 9/16” bolt. RIGHT Hand Thread. Details: Right hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More

Features high quality, factory style bushings to provide excellent vibration damping rubber bushings at both ends for premium daily driving and ride quality characteristics. The arms offer full range of movement and have excellent articulation and flex off-road. Learn More

TeraFlex JK/JKU Adjustable Alpine Flexarms (2-4” Lift) provide maximum adjustability, dependability, and performance while retaining factory control arm mounting locations on JK Wrangler and JKU Wrangler Unlimited models with 2-4” lifts. Can be added to any existing suspension lift Learn More

Rear Lower Sport FlexArm Kit For 2007+ Jeep Wrangler JK 2 Door & Unlimited 4 Door Models With 2.5" - 3" Lift Fits With 2.5-3" lift Premium black e-dipped coating Pre-adjusted length arms correct caster and pinion angle 1-5/8" x 0.156 wall DOM tubing Sold as a pair TeraFlex sport fixed-length flexarms are designed to offer maintenance free performance for 2.5" - 3" lift. Pre-adjusted length arm corrects caster and pinion angle for 2.5" - 3" lift kits. 1-5/8" x 0.156 wall DOM tube... Read More Learn More

Front Lower Sport FlexArm Kit For 2007+ Jeep Wrangler JK 2 Door & Unlimited 4 Door Models With 2.5" - 3" Lift Fits 2.5 to 3" lifts Black powder coat 1-5/8" x 0.156 wall DOM Factory style bushings TeraFlex sport fixed-length flexarms are designed to offer maintenance free performance for 2.5" - 3" lift. Pre-adjusted length arm corrects caster and pinion angle for 2.5" - 3" lift kits. 1-5/8" x 0.156 wall DOM tube stands up to trail abuse and demands. High quality, factory style bushings... Read More Learn More

Front Upper Sport FlexArm Kit For 2007+ Jeep Wrangler JK 2 Door & Unlimited 4 Door Models With 2.5" - 3" Lift With 2.5-3" lift Premium black e-dipped coating Pre-adjusted length arms correct caster and pinion angle 1-5/8" x 0.156 wall DOM tubing Sold as a pair TeraFlex sport fixed-length flexarms are designed to offer maintenance free performance for 2.5" - 3" lift. Pre-adjusted length arm corrects caster and pinion angle for 2.5" - 3" lift kits. 1-5/8" x 0.156 wall DOM tube stands up... Read More Learn More

The JT control arm bolts can become damaged over time due to the extreme torque specs required by the Factory specifications, and even stretched after with repeated removal and installation. Learn More

TeraFlex JL 2dr: Alpine Long Control Arms and Alpine Long Arm Brackets provide complete alignment adjustability for maximum performance on JL Wrangler or Unlimited models with 3 to 6 Inch lifts. Learn More

Control Arm Relocation Bracket; For Use With Teraflex Alpine Control Arms Learn More

Although traditional rubber bushings offer quiet operation and satisfactory longevity, their limitations began to surface during off-road driving and extreme articulation. Learn More

TeraFlex JL: Alpine Long Control Arms provide complete alignment adjustability for maximum performance on JL Wrangler or Unlimited models with 3 to 6 Inch lifts. Learn More

These CAD-designed TeraFlex JL 4dr: Alpine Long Arm Brackets are engineered for maximum strength. Learn More

Rear Lower Passenger Side Long FlexArm Single For 2004-06 Jeep Wrangler TJ Unlimited Models Fits Passenger side Allows custom pinion and caster angles Sold individually The TeraFlex TJ Unlimited rear lower long FlexArm can be added to any existing TeraFlex long arm suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit... Read More Learn More

Rear Lower Driver Side Long FlexArm Single For 2004-06 Jeep Wrangler TJ Unlimited Models Fits Driver side Allows custom pinion and caster angles Sold individually The TeraFlex LJ Unlimited rear lower long FlexArm can be added to any existing TeraFlex long arm suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes... Read More Learn More

TeraFlex JK/JKU Adjustable Alpine Flexarms (2-4” Lift) provide maximum adjustability, dependability, and performance while retaining factory control arm mounting locations on JK Wrangler and JKU Wrangler Unlimited models with 2-4” lifts. Can be added to any existing suspension lift Learn More

Alpine Short Control Arms provide complete alignment adjustability and dependability for maximum performance on JL Wrangler/Unlimited & Gladiator JT models with 0-4.5" lifts. Learn More

Replace or repair your used FlexArm bushings and sleeves. This kit is designed to repair a complete set of four non modular control arms long or short. Bushings are made from polyurethane, and sleeves are zinc plated steel. Details: Lower FlexArm Includes Bushings and Sleeves 4 Arms Includes: 16 Bushings 8 Sleeves Learn More

Replace or repair your used FlexArm bushings and sleeves. This kit is designed to repair a complete set of four non modular control arms long or short. Bushings are made from polyurethane, and sleeves are zinc plated steel. Details: FlexArm Bushing Repair Kit Upper FlexArm One End Incl. Bushing/Sleeves Learn More

TJ Rear Axle Upper FlexArm Mount- Driver Details: FlexArm Mount Driver Side Rear Upper Learn More

TeraFlex set the standard in Wrangler performance with the adjustable FlexArm that offered performance features never before seen. They now have delivered the next generation of control arms and components with the Monster Series HD Rod Ends. TeraFlex designed a superior FlexArm that addressed and solved some of the limitations of the original Standard FlexArm. The new Monster FlexArm offers superior tubing strength and the largest interchangeable and rebuildable ends ever. Sold In Pairs... Read More Learn More

The TeraFlex TJ rear upper long flexarm driver bracket is CNC laser cut and precision bent for accurate fitment. Learn More

TeraFlex JL: Alpine Long Control Arms provide complete alignment adjustability for maximum performance on JL Wrangler or Unlimited models with 3 to 6 Inch lifts. Features dependable, maintenance-free, factory-style bushings. Learn More