Jeep Part Sales

Includes 2 SpeedBumps for the front of a vehicle. TeraFlex SpeedBumps are an innovative composite bumpstop system designed for high-speed, high-performance JK Wrangler applications. The maintenance free, performance tuned closed cell micro-cellular polyurethane technology provides a simple installation with no further adjustment or tuning required. Details: SpeedBump Bumpstop Kit Rear Incl. Brackets Speedbumps 3 in. Travel Cylinders Learn More

The TeraFlex JK Outback rear bumper for the JK Wrangler is designed to offer ultimate rock protection, and continue to match the design styling of the vehicle’s body but still offer the protection needed to allow the 4500+ lb. vehicle to push over rocks and obstacles. Learn More

TeraFlex SpeedBumps have the following features: JK Specific tuned for high speed performance, Simple installation - no welding required, Quiet movement and function (no pad-slap clunk), Absorbs large impact energy progressively during compression to help prevent bent axle tubes, Maintenance free, all-composite construction. No gas charging from leaks. Resistant to all types of conditions (mud, salt, sand, dust, etc.). Compatible with all suspension systems that retain factory axle and spring... Read More Learn More

This tow strap is designed for those 'unlikely' situations where you have to pull out the strap - for your friend of course. The strap features a 20,000 lb. rating with red 'stress thread' for a visible warning of potential strap failure. It measures 30' long x 2", wide, with reinforced stitched loop ends. Details: Universal application 30' x 2" long Red "stress thread" for visibile warning of breakage Learn More

Replacement Quick Disconnect Pin For Upper Frame Bracket This is the small bracket used on the frame to attach your sway bar link when the sway bar is disconnected. Fits 2007+ Wranglers Left and/or Right applications.Requires 2 per Jeep. Learn More

The TeraFlex JK bolt on D-Ring mount kit is designed as a universal recovery point, and bolts directly to the front JK frame. The kit comes with the D-Ring mount, and hardware. D-Ring shackles are sold separately. Details: Fits the outside of many aftermarket bumpers Bare steel No drilling required for JK Applications Mounting Pattern Height 64.42mm/ 2.52in. Mounting Pattern Width 134.1mm/5.28in. Mouning Plate Height 100mm/3.93in. Learn More

The TeraFlex JKU 4-Door Aluminum Rock Slider Kit protects the lower side of your JKU Wrangler Unlimited. Learn More

The TeraFlex license plate mount kit will relocate your license plate from it’s vulnerable stock location to your spare tire. This kit includes the licesne plate bracket, and all necessary hardware (does not include lug nut mounting studs). Note: Most states require the license plate to be illuminated at night. This bracket does not include any license plate illumination lights. Details: No lug nuts included Learn More

Proper final bumpstop length is critical to prevent bottoming out of your shocks, or tires into your fenders. These bumpstop pads allow you to fine tune your final bumpstop length. Details: SpeedBump Bumpstop Pad Kit Strike Pair Learn More

TeraFlex SpeedBumps are an innovative composite bumpstop system designed for high-speed, high-performance JK Wrangler applications. The maintenance free, performance tuned microcellular polyurethane technology provides a simple installation with no further adjustment or tuning required for a lifetime of dedicated off road use. These kits include Speedbumps ONLY and No Extra Extended Bump Stops. Includes 4 SpeedBumps for the entire vehicle. TeraFlex SpeedBumps are an innovative composite... Read More Learn More