Alloy USA Rear Driver Side 30 Spline Performance Axleshaft For 2003-06 Jeep Wrangler TJ Models With Dana 44 Axle With ABS & Disc Brakes (C-Clip) 21145
SKU
ALY-21145
- Manufacturer: Alloy USA
- Part: Differential - Axle Shafts & Kits
Alloy USA Rear Driver Side Performance Axleshaft
2003-06 Jeep Wrangler TJ Models With Dana 44 Axle With ABS & Disc Brakes (C-Clip)
Chromoly Replacement Axle Shaft
Dana 44
30 Spline
5 on 4.5in. Bolt Pattern
30.062in. Overall Length
Driver Side
Does NOT Include Bearings Seals Or Studs
For Use In 03-06 Jeep TJ
With ABS And Disc Brake
Don’t just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
Fits These Vehicles:
03-06 Jeep Wrangler (TJ)
Original Alloy USA Part 21145
2003-06 Jeep Wrangler TJ Models With Dana 44 Axle With ABS & Disc Brakes (C-Clip)
Chromoly Replacement Axle Shaft
Dana 44
30 Spline
5 on 4.5in. Bolt Pattern
30.062in. Overall Length
Driver Side
Does NOT Include Bearings Seals Or Studs
For Use In 03-06 Jeep TJ
With ABS And Disc Brake
Don’t just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
Fits These Vehicles:
03-06 Jeep Wrangler (TJ)
Original Alloy USA Part 21145
CA$199.95
Alloy USA 21145
Alloy USA Rear Driver Side Performance Axleshaft
2003-06 Jeep Wrangler TJ Models With Dana 44 Axle With ABS & Disc Brakes (C-Clip)
Chromoly Replacement Axle Shaft
Dana 44
30 Spline
5 on 4.5in. Bolt Pattern
30.062in. Overall Length
Driver Side
Does NOT Include Bearings Seals Or Studs
For Use In 03-06 Jeep TJ
With ABS And Disc Brake
Don’t just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
Fits These Vehicles:
03-06 Jeep Wrangler (TJ)
Original Alloy USA Part 21145
Alloy USA Rear Driver Side Performance Axleshaft
2003-06 Jeep Wrangler TJ Models With Dana 44 Axle With ABS & Disc Brakes (C-Clip)
Chromoly Replacement Axle Shaft
Dana 44
30 Spline
5 on 4.5in. Bolt Pattern
30.062in. Overall Length
Driver Side
Does NOT Include Bearings Seals Or Studs
For Use In 03-06 Jeep TJ
With ABS And Disc Brake
Don’t just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
Fits These Vehicles:
03-06 Jeep Wrangler (TJ)
Original Alloy USA Part 21145