TeraFlex

This weldable threaded insert makes custom link building simple and easy. Weld the insert to control arm length tubing. Weldable inserts are available to fit our large (1-1/4” 12 tpi.), medium & small (7/8” 18 tpi.) Monster ends. The large inserts require a minimum of 1.5” ID tubing and the medium/small inserts require a minimum of 1-1/8” ID tubing. Sold Individually. Details: Left hand thread 1.25" insert Requires 1.5" diameter tubing minimum Learn More

These TeraFlex Emergency Brake Cables are the same ones included in our TJ: Rear Disc Brake Conversion. They also fit the TJ Wrangler model–s factory rear disc brakes as well as our 1991-06 Dana / Chrysler: Rear Disc Brake Conversion Kit. Learn More

9.5" FlexArm Tube Length TeraFlex offers standard lengths of FlexArm tubing pre-tapped for our large Monster ends (1-1/4" x 12tpi threads). These can be used for custom suspension links or torque arms. The DOM tubing is 1.75" OD and .281 wall for superior strength to meet the needs of high power and torque applications. Tube length is measured as the actual length of tube. Learn More

The TeraFlex HD30 differential covers are designed to offer extreme protection from rocks, obstacles and other debris on the trail. The TeraFlex differential covers are more than 3/8in. thick. Details: For Use On Dana 25/27/30 Front Axles Cast From Thick Nodular Iron Black Powder Coat Finish Recessed Bolt Holes Equipped With Filler And Drain Plugs. Learn More

The angled rod end forging is designed for applications needing additional clearance for tires, or other frame configurations. The Flex joint ends provide excellent off-road capabilities with articulation and durability. They dampen road noise and vibration. The forging uses standard 1-1/4” x 12 tpi. with a 9/16” center bolt. 10 degree angle off joint. Used on our JK Lower Control Arms for better Tire clearance in tight turns. Shoulder width= 2-5/8” Bolt dia.= 9/16” [14mm] Shank angle =... Read More Learn More

Large Rod End Field Repair Tool This repair tool will make joint rebuilding in the field as simple as it gets. This in fact is the same tool that we use in house to rebuild joints. The repair tool is easy to use with two open end wrenches, or sockets. Learn More

The medium spherical urethane Monster end uses the same internals as its larger brother, in a scaled down version. The end utilizes a 7/8” x 18 tpi. shank and accepts a 7/16” bolt. Details: Right hand thread 2" shoulder width 7/8" x 18 TPI shank Accepts 7/16" bolt Shoulder Width = 2" Bolt Diameter = 12mm 7/8-18 UNS thread 1 1/4" wrench on jam nut Learn More

This tow strap is designed for those 'unlikely' situations where you have to pull out the strap - for your friend of course. The strap features a 20,000 lb. rating with red 'stress thread' for a visible warning of potential strap failure. It measures 30' long x 2", wide, with reinforced stitched loop ends. Details: Universal application 30' x 2" long Red "stress thread" for visibile warning of breakage Learn More

Raise the swaybar mount up and out of the way to make clearance for custom steering components. The mount is laser cut and formed from 3/8” steel for durability and strength. Dana 30 Left mount. Details: Dana 30 Left hand side Learn More

Raise the swaybar mount up and out of the way to make clearance for custom steering components. The mount is laser cut and formed from 3/8” steel for durability and strength. Dana 30 Right Mount. Details: Dana 30 Right hand side Learn More