Teraflex Heavy Duty Ball Joint Set without Knurling for 84-06 Jeep Cherokee XJ, Comanche MJ, Grand Cherokee ZJ, Wrangler YJ & Wrangler TJ 1353100
SKU
TER-1353100
We Price Match
- Manufacturer: TeraFlex
- Part: Ball Joints
TeraFlex HD ball joints are engineered to handle the increased load caused by oversized tires and offset wheels.
Special Price $412.21 Regular Price $484.95
Teraflex 1353100
TeraFlex HD ball joints are engineered to handle the increased load caused by oversized tires and offset wheels. The upper ball joint incorporates hard sintered wear bushings to handle extreme side load demands with out failure and includes an easy top access grease port for simple maintenance. The lower ball joint features adjustable preload using the included tool when assembled as well as future adjustments. Dual machined grease passages in the lower joint housing assembly provides lubrication access without affecting the ball joint load surface. The lower ball joint also eliminates the nylon ball socket wear sleeve that is prone to failure.
TeraFlex HD ball joints are engineered to handle the increased load caused by oversized tires and offset wheels. The upper ball joint incorporates hard sintered wear bushings to handle extreme side load demands with out failure and includes an easy top access grease port for simple maintenance. The lower ball joint features adjustable preload using the included tool when assembled as well as future adjustments. Dual machined grease passages in the lower joint housing assembly provides lubrication access without affecting the ball joint load surface. The lower ball joint also eliminates the nylon ball socket wear sleeve that is prone to failure.
Fitment:
84-01 Jeep Cherokee XJ97-06 Jeep Wrangler TJ
87-95 Jeep Wrangler YJ
04-06 Jeep Wrangler Unlimited TLJ
93-98 Jeep Grand Cherokee ZJ
Features:
Upper Ball Joint FeaturesExtremely hard sintered wear bushings to handle extreme side load demands without failure
Magnesium Phosphate coating to inhibit corrosion throughout
Heat treated 4140 chromoly ball/stud & 1045 carbon steel housing
Factory style serrated flange nut & grease fitting
Without knurls
Lower Ball Joint Features
Hard alloy tool steel slotted wear plate for ball / stud to socket wear protection
Wear plate features grease channels for increased flow through entire joint ensuring longevity & predictable operation
Magnesium Phosphate coating to inhibit corrosion & friction throughout
Heat treated 4140 chromoly ball / stud
Huge 30mm (1.18”) ball
Factory style serrated flanged castle nut
Ball joint pre-load adjustability provides the end user w/ near effortless wear adjustment (kid includes Preload Adjustment Tool)
Low-profile single lip dust seal eliminates torn conventional dust boot concerns
Adjustable ball stud retaining ring for accurate initial & future preload adjustments that can be done w/out any axle disassembly
Adjustable preload can be performed with simple hand tools
Adjustable end cap with two (2) zerk fittings (“Frog Eye”) allow greasing access from either side w/out axle shaft removal even with larger RCV shafts
Dual helical grease grooves machined in the retaining ring allow spent grease to exit through the low-profile seal
Low-profile seal prevents contaminants, while allowing spent grease to evacuate from the ball joint
Without knurls
Notes:
We recommend ball joints without knurls (1355100) as they will not score the inner knuckle & open up the bore.
Also offered with knurls (1355300) for ball joints with a loose press fit in the inner knuckle due to repeated ball joint replacement or if knurled ball joints have been installed in the past.
Warranty:
Limited Lifetime Warranty.
Parts Included:
Upper Ball Joint - PairLower Ball Joint - Pair
Grease Fitting Tool
Nuts
Cotter Pins
Lower Ball Joint Preload Adjustment Tool
Important Note: Will not fit RCV High Performance Axle Shafts
Notes:
We recommend ball joints w/out knurls (1355100) as they will not score the inner knuckle & open up the bore.
Also offered w/ knurls (1355300) for ball joints w/ a loose press fit in the inner knuckle due to repeated ball joint replacement or if knurled ball joints have been installed in the past.
| Manufacturer | TeraFlex |
|---|---|
| Searchable Sku | 1353100 |
