TeraFlex 70” Tera60 HD Front w/ Locking Hub –No R&P, Locker, Carrier (0-6" Lift) for 2018+ Jeep Wrangler JL, JLU & Gladiator JT 3170000

SKU
TER-3170000
The unloaded Tera60 HD Front Axle Assembly w/ Locking Hub includes SlimLock Hub Kit, Super 60 bearings, inner and outer axle shafts, knuckle assembly, ball joints, brakes, and sensors. Add your choice of ring & pinion gear ratio, locker, and carrier.

TeraFlex HD Front Axle Housings are perfect for replacing bent, broken, or damaged axles in JL Wrangler/Unlimited and JT Gladiator vehicles including Rubicon models. Can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axles’ weak areas.

Tera60 HD Front Axle Housings are the ultimate upgrade for JL and JT models requiring maximum suspension up travel and compression. Compatible with all Super 60 gear ratios for extreme duty applications requiring additional ring and pinion strength.

Our heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, forged inner knuckles, and more!
CA$12,074.95
Bulk Item Surcharge: CA$399.95
Teraflex 3170000

The unloaded Tera60 HD Front Axle Assembly w/ Locking Hub includes SlimLock Hub Kit, Super 60 bearings, inner and outer axle shafts, knuckle assembly, ball joints, brakes, and sensors. Add your choice of ring & pinion gear ratio, locker, and carrier.

TeraFlex HD Front Axle Housings are perfect for replacing bent, broken, or damaged axles in JL Wrangler/Unlimited and JT Gladiator vehicles including Rubicon models. Can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axles’ weak areas.

Tera60 HD Front Axle Housings are the ultimate upgrade for JL and JT models requiring maximum suspension up travel and compression. Compatible with all Super 60 gear ratios for extreme duty applications requiring additional ring and pinion strength.

Our heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, forged inner knuckles, and more!

 

Fitment:

2018+ Jeep Wrangler JL
2018+ Jeep Wrangler JLU
2020+ Jeep Gladiator JT

 

Features:

• WMS-WMS: 70”
• Axle Tube: 3.25” x 0.375”
• Wheel Bolt Pattern: 8x6.5”
• Gear Ratio: NA
• Sealed SlimLock Locking Hub Assembly for long-term maintenance-free dependability
• 3.25” O.D. x 0.375” wall DOM axle tube for superior strength vs. weight
• 70” WMS-WMS and 8x6.5” wheel bolt pattern
• Fixed spindle mount hub assembly
• Tera60 specific high-pinion front axle housing design
• Includes 1350 series pinion yoke
• 35-spline inner and outer axle shafts
• Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing
• Oversized outer pinion bearing handles increased torque and high-load conditions
• High-capacity housing holds maximum amount of oil
• Asymmetric housing design for extra-long tube side strength
• Pre-installed inner axle seals
• HD forged inner knuckles w/ greater upper and lower section strength
• Ductile cast iron housing w/ increased rib gussets
• HD ductile iron differential cover
• Smooth radius bottom design to glide over rocks and obstacles
• Integrated lower control arm skid plates
• High-flow oil passages
• Bottom oil drain hole for simple fluid changes
• Reinforced front track bar mount (ties into spring pad) for greater strength
• UV protected triple-stage powder coat for corrosion resistance
• 1/4”-thick CNC laser cut axle brackets for extreme strength
• Integrating the front upper control arm mounts into the housing increases up travel an additional 2” compared to other aftermarket Dana 60 axles
• Pre-installed upper control arm bushings
• Proper pinion angle and raised track bar bracket for lifted JL/JT applications
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Retains all JL/JT ESP, ABS, and speedometer sensor capability
• 100% engineered, designed, and built in the USA w/ new components
• 1-Year/Unlimited Mileage Warranty

 

Parts Included:

• Spicer bearings and install kits
• 35-spline inner and outer axle shafts
• Spicer HD Ball Joints
• 1350 series pinion yoke
• Dana 60: SlimLock Hub Kit (# 3449350)

 

Important Note: REQUIRES adjustable control arms for caster angle adjustments.

Just Jeeps Labor Installation Estimate: 6

Buy TeraFlex Front Tera60 Axle With Lockout Hubs Without Ring & Pinion, Carrier Or Bearings For 2007-18 Jeep Wrangler JK 2 Door & Unlimited 4 Door Models 3670000 for CA$10,003.95

You may like this products Related Products