Synergy Front Track Bar Relocation Bracket for 18-26+ Jeep Wrangler JL, JLU & 20-26+ Gladiator JT 8855-11
SKU
SYN-8855-11
We Price Match
- Part: Suspension - Track Bars
- Manufacturer: Synergy MFG
The Synergy Jeep JL/JLU/JT Front Track Bar relocation bracket is the definitive fix for a lifted JL or JT.
Special Price $351.01 Regular Price $412.95
Synergy MFG 8855-11
The Synergy Jeep JL/JLU/JT Front Track Bar relocation bracket is the definitive fix for a lifted JL or JT. When lifting beyond 2” it becomes critical to correct several important areas of the suspension geometry. By raising the track bar mount at the axle side we can simultaneously re-center the axle under the vehicle and raise the roll center height to improve the stability of the lifted Jeep. When we flatten out the angles of the drag link and track bar at ride height, we minimize axle shift during suspension travel. This bracket completes the package for our Stage 3 system, and combines with our proven drag link to create the 8811-01 JL/JLU/JT Steering Correction Kit.
The Synergy Jeep JL/JLU/JT Front Track Bar relocation bracket is the definitive fix for a lifted JL or JT. When lifting beyond 2” it becomes critical to correct several important areas of the suspension geometry. By raising the track bar mount at the axle side we can simultaneously re-center the axle under the vehicle and raise the roll center height to improve the stability of the lifted Jeep. When we flatten out the angles of the drag link and track bar at ride height, we minimize axle shift during suspension travel. This bracket completes the package for our Stage 3 system, and combines with our proven drag link to create the 8811-01 JL/JLU/JT Steering Correction Kit.
Fitment:
18-26+ Jeep Wrangler JL18-26+ Jeep Wrangler JL Unlimited
20-26+ Jeep Gladiator JT
Features:
Correctly re-centers front axle at 3” lift height without a track barRaises vehicle roll center height for improved stability and reduced body roll
Lessens track bar angle to improve geometry
Raises front track bar 3.125" from stock location.
Laser cut and CNC formed from 3/16 and 1/4 inch steel for precision fit and maximum durability.
Securely indexes to the factory track bar bracket and reinforces with additional attachment points.
Raises axle side sway bar mounting holes to improve geometry for lifted Jeeps.
100 percent bolt-on design assures an easy, trouble free installation with the use of basic hand tools.
No cutting or drilling required.
Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
Notes:
The 8855-11 supersedes the 8855-01
Must run drag link in high steer configuration, flipped above knuckle, to use this bracket
We always recommend manually disconnecting your sway bar links in any offroad application on both Rubicon and non-Rubicon models
Factory sway bar disconnects do not allow for enough articulation to prevent damage to your track bar mount or electronic disconnect. We recommend part number 8859-12 for a Quick Disconnect Sway Bar Link Kit
8875-01 adjustable front track bar recommended for lifts 3” or higher.
Minimum of 3” bump stop spacing required.
Maximum 4.75” wheel backspacing required to clear drag link in flipped position.
| Searchable Sku | 8855-11 |
|---|---|
| Bulk Item Surcharge | $0.00 |
| Manufacturer | Synergy MFG |
Write Your Own Review
