TeraFlex High Steer HD Aluminum Drag Link Kit – Stock Taper Ends For 1987-06 Jeep Wrangler YJ, TJ, XJ, ZJ, MJ 4920244
SKU
TER-4920244
We Price Match
- Manufacturer: TeraFlex
- Part: Steering - Upgrades
Upgrade your stock steering system with the TeraFlex TJ: High Steer HD Aluminum Drag Link Kit. The High Steer HD Aluminum Drag Link and Tie Rod (NOT INCLUDED) can be used to convert the TJ’s stock steering to a cross steering or a flipped steering setup.
Special Price $259.21 Regular Price $304.95
TeraFlex 4920244
Upgrade your stock steering system with the TeraFlex TJ: High Steer HD Aluminum Drag Link Kit. The High Steer HD Aluminum Drag Link and Tie Rod (NOT INCLUDED) can be used to convert the TJ’s stock steering to a cross steering or a flipped steering setup.
“Flipping” the High Steer HD Aluminum Drag Link over the Knuckle helps eliminate front-end shimmy, bump steer, and other alignment issues.
Requires the TeraFlex TJ: Dana 30/44 High Steer Knuckle (# 4828490) and TJ: High Steer HD Aluminum Tie Rod Kit (Offset Stock Taper Ends: # 4920251 or Stock Taper Ends: # 4920255).
Fits:
• TJ Wrangler (short wheelbase)
• LJ Wrangler Unlimited (long wheelbase)
• ZJ Grand Cherokee
• XJ Cherokee
• MJ Comanche
• Dana 30 front axle
• Rubicon Dana 44 front axle
• 4-6” Lift
Includes:
• High Steer HD Aluminum Drag Link
• Stock Taper Drag Link End – Left-Hand Thread (# 4920221)
• Stock Taper Drag Link End – Right-Hand Thread (# 4920222)
Features & Benefits:
• Bolts directly to new High Steer Knuckle
• Can be used to convert to cross steering or over the knuckle for flipped steering
• Helps eliminate front end shimmy and other alignment issues
• Extruded drag link eliminates excess flex during binding and high load steering maneuvers
• Constructed from 1.5” hexagonal 6061-T6 aluminum – higher specific strength than 1018 steel
• Yield strength of 45,000 lbs., yet 1/3 the weight of steel
• Aluminum construction deflects 3x further than steel allowing for return to its original shape
• Hexagon shape allows tightening of jam nuts w/ 1.5” wrench
• Tie rod end features 4140 chromoly ball/stud and 1045 carbon steel housing
Upgrade your stock steering system with the TeraFlex TJ: High Steer HD Aluminum Drag Link Kit. The High Steer HD Aluminum Drag Link and Tie Rod (NOT INCLUDED) can be used to convert the TJ’s stock steering to a cross steering or a flipped steering setup.
“Flipping” the High Steer HD Aluminum Drag Link over the Knuckle helps eliminate front-end shimmy, bump steer, and other alignment issues.
Requires the TeraFlex TJ: Dana 30/44 High Steer Knuckle (# 4828490) and TJ: High Steer HD Aluminum Tie Rod Kit (Offset Stock Taper Ends: # 4920251 or Stock Taper Ends: # 4920255).
Fits:
• TJ Wrangler (short wheelbase)
• LJ Wrangler Unlimited (long wheelbase)
• ZJ Grand Cherokee
• XJ Cherokee
• MJ Comanche
• Dana 30 front axle
• Rubicon Dana 44 front axle
• 4-6” Lift
Includes:
• High Steer HD Aluminum Drag Link
• Stock Taper Drag Link End – Left-Hand Thread (# 4920221)
• Stock Taper Drag Link End – Right-Hand Thread (# 4920222)
Features & Benefits:
• Bolts directly to new High Steer Knuckle
• Can be used to convert to cross steering or over the knuckle for flipped steering
• Helps eliminate front end shimmy and other alignment issues
• Extruded drag link eliminates excess flex during binding and high load steering maneuvers
• Constructed from 1.5” hexagonal 6061-T6 aluminum – higher specific strength than 1018 steel
• Yield strength of 45,000 lbs., yet 1/3 the weight of steel
• Aluminum construction deflects 3x further than steel allowing for return to its original shape
• Hexagon shape allows tightening of jam nuts w/ 1.5” wrench
• Tie rod end features 4140 chromoly ball/stud and 1045 carbon steel housing
Searchable Sku | 4920244 |
---|---|
Manufacturer | TeraFlex |