Teraflex Falcon Nexus EF 2.1 Steering Stabilizer For 2018+ Jeep Gladiator JT & Wrangler JL 2 Door & Unlimited 4 Door Models 09-02-21-110-000
SKU
TER-09-02-21-110-000
We Price Match
- Manufacturer: TeraFlex
- Part: Steering - Stabilizer
Improve the steering and handling in your Jeep with a Steering Stabilizer that is neutrally charged, and has the same smooth operation in both directions. This means it will not push against your tie rod causing your steering to wander.
Special Price $374.36 Regular Price $467.95
TeraFlex 09-02-21-110-000
Improve the steering and handling in your Jeep with the Teraflex Falcon Nexus EF 2.1 Steering Stabilizer. Teraflex designed this 100% bolt on stabilizer specifically for use with the Wrangler JL. Every component of the Falcon Nexus EF 2.1 is engineered for performance and long-lasting reliability. The “EF” stands for Equal Force, which means the stabilizer is neutrally charged, and has the same smooth operation in both directions. Falcon shocks are completely rebuildable, and covered by a Three-Year Limited Warranty.
Unlike other steering stabilizers, the Falcon Nexus EF 2.1 Steering Stabilizer uses Equal Force (EF). This means it will not push against your tie rod causing your steering to wander. The digressive linear piston and base valve technology maintains smooth movement, even under extended rapid movements.
This steering stabilizer was designed for the Jeep Wrangler JL. It is compatible with both the two and four door models, regardless of trim level or factory options. It will fit with any lift from 0” to 6”, and is optimized for clearance during suspension travel. The Falcon Nexus EF 2.1 Steering Stabilizer bolts up to factory mounting points and requires no cutting, drilling, or other modifications.
Teraflex uses aircraft grade 6061-T6 aluminum alloy for the 2.125” diameter shock bodies. The inner surface is smooth honed for ultimate performance. The 5/8” induction hardened chrome plated shaft will not buckle, bend, or corrode. Teraflex checks all of their Falcon shock hardware with a 1,000-hour salt spray corrosion resistance test. The internal billet piston is hard anodized for extended wear resistance. To prevent cavitation, Teraflex uses an inline Oil Gas Separator (OGS) and 1-piece Teflon bronze piston wear band with O-ring.
The oil used in Falcon shocks is a high-tech Red Line full synthetic shock oil. It is used for its high viscosity index of 519, and is designed for constant heavy-duty use without fading. The formula contains anti-wear and lubricity agents to extend the life of your shocks.
Specifications:
Tie Rod Mount: Stock
Lift Height: 0-6”
Improve the steering and handling in your Jeep with the Teraflex Falcon Nexus EF 2.1 Steering Stabilizer. Teraflex designed this 100% bolt on stabilizer specifically for use with the Wrangler JL. Every component of the Falcon Nexus EF 2.1 is engineered for performance and long-lasting reliability. The “EF” stands for Equal Force, which means the stabilizer is neutrally charged, and has the same smooth operation in both directions. Falcon shocks are completely rebuildable, and covered by a Three-Year Limited Warranty.
Unlike other steering stabilizers, the Falcon Nexus EF 2.1 Steering Stabilizer uses Equal Force (EF). This means it will not push against your tie rod causing your steering to wander. The digressive linear piston and base valve technology maintains smooth movement, even under extended rapid movements.
This steering stabilizer was designed for the Jeep Wrangler JL. It is compatible with both the two and four door models, regardless of trim level or factory options. It will fit with any lift from 0” to 6”, and is optimized for clearance during suspension travel. The Falcon Nexus EF 2.1 Steering Stabilizer bolts up to factory mounting points and requires no cutting, drilling, or other modifications.
Teraflex uses aircraft grade 6061-T6 aluminum alloy for the 2.125” diameter shock bodies. The inner surface is smooth honed for ultimate performance. The 5/8” induction hardened chrome plated shaft will not buckle, bend, or corrode. Teraflex checks all of their Falcon shock hardware with a 1,000-hour salt spray corrosion resistance test. The internal billet piston is hard anodized for extended wear resistance. To prevent cavitation, Teraflex uses an inline Oil Gas Separator (OGS) and 1-piece Teflon bronze piston wear band with O-ring.
The oil used in Falcon shocks is a high-tech Red Line full synthetic shock oil. It is used for its high viscosity index of 519, and is designed for constant heavy-duty use without fading. The formula contains anti-wear and lubricity agents to extend the life of your shocks.
Specifications:
Tie Rod Mount: Stock
Lift Height: 0-6”
Fitment:
2020+ Jeep Gladiator (JT)2018+ Jeep Wrangler (JL)
2018+ Jeep Wrangler Unlimited (JL)
* Not compatible with diesel models due to OEM bolt size
Features:
Equal Force (EF) side-to-side resistance for consistent steering wheel responseAllows for balanced return to center equilibrium
Maintains smooth movement under extended & rapid turning maneuvers
Optimized fitment for clearance during full suspension travel & articulation
OEM style sealed rod end joint mounting provides direct responsiveness
6061-T6 aluminum alloy shock body resists wear & protects internal components while providing superior heat dissipation
Smooth honed internal shock body surface for long term performance
2.125” shock body provides optimal performance
Low-profile body cap optimized for maximum clearance & unobstructed suspension travel
5/8” induction hardened chrome plated shaft resists rock damage & corrosion as well as prevents shaft buckling
No shaft displacement issues (no external reservoir required)
Maximum shaft diameter allows for more precise tuning
Hard anodized billet piston
1-piece Teflon bronze piston wear band w/ O-ring
Digressive linear piston & base valve technology
Inline OGS Oil/Gas Separator prevents cavitation
Red Line full synthetic shock oil with high viscosity index of 519 for consistent performance across all temperatures & reduced shock fade
Synthetic formula also contains special anti-wear & lubricity agents for excellent thermal stability
1,000-hour salt spray corrosion resistance test on all hardware
Serviceable & rebuildable (factory serviced)
Built in-house at the TeraFlex Falcon Shocks Division
Warranty:
Three-Year Limited Warranty
Parts Included:
Steering StabilizerMounting Brackets
Important Note: * Not compatible with diesel models due to OEM bolt size
| Manufacturer | TeraFlex |
|---|---|
| Searchable Sku | 09-02-21-110-000 |
