Steering - Upgrades

The TeraFlex Dodge 1-Ton Large Taper Insert Sleeve is used for mounting tie rod ends in steering conversions such as our TJ High Steer Kits (# 1849000 or # 1813000). This tapered insert matches a factory Dodge Dana 60 taper and requires an 0.875" O.D. hole. Learn More

These TeraFlex TJ/LJ Heavy-Duty Large Taper Tie Rod Ends utilize a one-ton joint end and a large taper rod end to fit a standard Dana 60 front axle or a Tera CRD60 axle. Learn More

The TeraFlex TJ high steer trackbar kit is designed to be used in conjunction with our high steer kit. This kit will allow you to fine tune the drag link & trackbar angles to eliminate and correct bumpsteer or other front end issues. The kit includes an upper frame bracket, lower axle bracket, and adjustable trackbar. Both brackets feature multiple mounting holes to fine tune for lift height and trackbar position. This kit is designed to put the trackbar parallel with the drag link. This kit... Read More Learn More

Tera has developed heavy duty tie rod ends that utilize a one-ton joint end, and are available in either a stock Jeep taper or a large one-ton taper (standard Dana 60). The stock taper rod ends will fit Dana 30 knuckle holes. The large taper will fit the larger 60 type knuckles, as are used in Tera"™s HD axle line. Additionally the tie rod ends are available with an offset (for use with applications where differential interference may occur with the tie rod). Details: Left hand thread Small... Read More Learn More

Tera has developed heavy duty tie rod ends that utilize a one-ton joint end, and are available in either a stock Jeep taper or a large one-ton taper (standard Dana 60). The stock taper rod ends will fit Dana 30 knuckle holes. The large taper will fit the larger 60 type knuckles, as are used in Tera"™s HD axle line. Additionally the tie rod ends are available with an offset (for use with applications where differential interference may occur with the tie rod). Details: Right hand thread Small... Read More Learn More

The TeraFlex high steer system was originally designed to be used with our top of the line suspension system- the MAX-LCG, which utlilizes a front 4-link triangulation (eliminating the trackbar). The High Steer Kit is essential in that application. We found that many Jeeps with more than 5" of lift while still utilizing a trackbar system would benefit from a high steer solution. This kit will beef up the essential steering components of your Dana 30 front axle. The system includes a HD tie rod... Read More Learn More

The TeraFlex high steer system was originally designed to be used with our top of the line suspension system, the MAX-LCG, which utlilizes a front 4-link triangulation (eliminating the trackbar). Learn More

Tera has developed heavy duty tie rod ends that utilize a one-ton joint end, and are available in either a stock Jeep taper or a large one-ton taper (standard Dana 60). The stock taper rod ends will fit Dana 30 knuckle holes. The large taper will fit the larger 60 type knuckles, as are used in Tera"™s HD axle line. Additionally the tie rod ends are available with an offset (for use with applications where differential interference may occur with the tie rod). Details: Right hand thread Small... Read More Learn More

Dust Seal Boot For Large Teraflex Tie Rod Joints Replacement boot for tie rod ends both stock and large taper. Learn More

Tera has developed heavy duty tie rod ends that utilize a one-ton joint end, and are available in either a stock Jeep taper or a large one-ton taper (standard Dana 60). The stock taper rod ends will fit Dana 30 knuckle holes. The large taper will fit the larger 60 type knuckles, as are used in Tera"™s HD axle line. Additionally the tie rod ends are available with an offset (for use with applications where differential interference may occur with the tie rod). Details: Left hand thread Small... Read More Learn More