Old Man Emu Front Nitrocharger Shock Absorber for 76-86 Jeep CJ with 0" Lift 60097
SKU
OME-60097
We Price Match
- Manufacturer: Old Man Emu
- Part: Suspension - Shocks
Whether off-roading or commuting to work, the durable Emu Nitrocharger shock has no match.
Special Price $209.91 Regular Price $246.95
Old Man Emu 60097
Whether off-roading or commuting to work, the durable Emu Nitrocharger shock has no match. Ride, handling, and suspension travel are instantly improved with Emu shocks. This means that comfort and safety are increased too. Progressive and responsive, Emu's legendary shock absorbers set new standards in ride comfort over any terrain, and simply outperform the competition. Old Man Emu Nitrocharger shocks are designed, valved and tested by ARB, then manufactured in Australia exclusively for Old Man Emu.
Whether off-roading or commuting to work, the durable Emu Nitrocharger shock has no match. Ride, handling, and suspension travel are instantly improved with Emu shocks. This means that comfort and safety are increased too. Progressive and responsive, Emu's legendary shock absorbers set new standards in ride comfort over any terrain, and simply outperform the competition. Old Man Emu Nitrocharger shocks are designed, valved and tested by ARB, then manufactured in Australia exclusively for Old Man Emu.
Fitment:
76-83 Jeep CJ-576-86 Jeep CJ-7
81-85 Jeep CJ-8
Features:
Cylinder End Compression Stack
- Discs Thickness: . 0.15mm to 0.38mm
- Discs Diameters: 8.5mm, 11mm, 13mm, and 16.75mm
- 2 Extra Discs Added to Cylinder End Compression
- Different Diameter Discs in the Mid-Range Can Be Fine Tuned as a Multistage Compression Stack
Ten Disc Rebound Stack:
- Discs Thickness: . 0.11mm to 0.51mm
- Discs Diameter: 14mm to 30mm
- Bleed Aperture: 0.15mm2 to 2.90mm2
- Different Diameter Discs Can be Used to Create Multistaging Within the Stack
- Multistaging the Mid-Range Allows Forgiving Initial Control Over Small Road Imperfections, and Heavier More Commanding Control When Demanded
Ten Disc Compression Stack:
- Compression Stack Discs Are Constructed From the Same Material as the Rebound Stack
- Discs Thickness: .0045” to .0200”
- Discs Diameter: 14mm to 30mm
- Bleed Aperture: 0.15mm2 to 2.90mm2
- Different Diameter Discs Can be Used to Create Multistaging Within the Stack
- Multiple Tuning Options and Oil Flow Back Management
35mm High Flow Piston:
- Teflon Brand for Reduced Friction
- Reduces Shock Fade
- Less Restricted Design Reduces Heat Generation and Aeration
- Open Apertures Present More Uniform Flow to the Bleed Discs and Disc Stacks For More Consistent Control
Triple Lip Oil Seal:
- Virtually Eliminates Contaminant Damage
- Provides Outstanding Gas and Oil Retention
- Withstands Greater Internal Pressures and Higher Temperatures
Large Guild Rod Guide:
- Provides Greater Support to the Oil Seal and Increased Reserve Tube Volume For Oil Fill And Gas Expansion
Teflon Infused Bronze Slip Ring:
- Teflon Brand for Reduced Friction
- Tight Tolerances
- Consistent and Uniform Damping Performance
Dirt Shield
- Constructed From High Density Polyethylene (HDPE)
- Impact Resistant and Will Not Crack, Split, Or Shatter
Warranty:
3 Year Warranty
Parts Included:
Front Nitrocharger ShockShock Bushings
Manufacturer | Old Man Emu |
---|---|
Searchable Sku | 60097 |