TeraFlex Front 8-Lug Locking Hub Conversion Kit Without Brakes For 2007-18 Jeep Wrangler JK 2 Door & Unlimited 4 Door Model 3034411

SKU
TER-3034411
We Price Match
The TeraFlex JK front full float conversion kit is designed to upgrade JK Dana 30 and 44 axles.
$2,316.95
Bulk Item Surcharge: $119.95
TeraFlex 3034411

Front 8-Lug Locking Hub Conversion Kit Without Brakes For 2007-18 Jeep Wrangler JK 2 Door & Unlimited 4 Door Model

Features forged 4340 chromoly 35 spline stub shafts
forged 4140 chromoly spindle
8 on 6.5” wheel bolt pattern
One-ton Dana 60 application components throughout
2007-2012 Dana 30 axles will require new inner shafts with the larger u-joint end forgings
All 2013+ Dana 30 & Dana 44 JK axles use the same U-joint
Full Float kit may not work with all wheels

The TeraFlex JK front full float conversion kit is designed to upgrade JK Dana 30 and 44 axles. The full float conversion delivers several major benefits over a factory unit bearing design. We are able to dramatically reduce bearing load by increasing the distance between the inner and outer wheel bearings within the hub. These bearings ride on a forged 4140 chromoly spindle that accept readily available low cost industry standard bearings and seals. By incorporating an 8 on 6.5” wheel bolt pattern we are able to use one-ton Dana 60 application components throughout. The unique TeraFlex hub design allows for OE wheel speed sensors to be completely sealed from mud, rock and other damaging contaminants, ensuring clear constant data transmission to maintain all ABS and ESP functions. The SlimLock hub kit features forged 4340 chromoly 35 spline stub shafts. The hub design incorporates high surface area engagement with extreme durability. This kit is perfect for flat towing by allowing the hubs to be set in the unlocked position during transport. This full float conversion kit includes the TeraFlex performance big rotor kit.

 

Fitment:

2007-18 Jeep Wrangler (JK)
2007-18 Jeep Wrangler Unlimited (JK)

 

Features:

Compatible with Dana 30 and Dana 44 Front Axles
4140 Chromoly Spindles
Two Maintenance Free 3/4 Ton Truck Bearings Per Side
Requires TeraFlex Big Brake Calipers
Axle Shaft Carries no Weight
Bolt On Installation
Improves Gas Mileage
Prolongs Life of Front Driveline Components
Manual Locking Hubs Replace Weak Factory Unit Bearing
Sealed Tone Rings and Speed Sensors
Front Driveshaft and Ring & Pinion Do Not Rotate Unless Hubs are Locked
Perfect for Flat Towing
8x6.5 Bolt Pattern
Heavy Duty 9/16” Wheel Studs

 

Warranty:

Limited Lifetime Warranty.

 

Parts Included:

Full Float Axle Spindles
Full Float Front Hubs
SlimLock Locking Hubs
35 Spline Stub Shafts
Front Caliper Anchor Brackets
13.3” Big Brake Rotors
Inner and Outer Spindle Nuts
Sealed Tone Rings
Wheel Studs
Bearings
Thrust Washers
Seals
Hardware

 

Notes:

2007-2012 Dana 30 Axles Will Require New Inner Shafts with The Larger U-Joint End Forgings (#303118 For Driver Side and 303134 For Passenger Side)
All 2013+ Dana 30 & Dana 44 JK Axles Use the Same U-Joint.
The Full Float Kit May Not Work With All Wheels. Please Verify Fitment Before Installation
Requires Front Big Brake Calipers and Pads (Sold Separately)

Buy TeraFlex Front 8-Lug Locking Hub Conversion Kit Without Brakes For 2007-18 Jeep Wrangler JK 2 Door & Unlimited 4 Door Model 3034411 for CA$1,995.95