Steering - Upgrades

The TeraFlex JK/JKU Dana 30 & 44 High Steer System addresses all of the front-end steering issues associated with JK Wrangler and JKU Wrangler Unlimited models with 4-6” lift kits by maintaining proper steering geometry for superior highway drivability. Learn More

The TeraFlex Dodge 1-Ton Large Taper Insert Sleeve is used for mounting tie rod ends in steering conversions such as our TJ High Steer Kits (# 1849000 or # 1813000). This tapered insert matches a factory Dodge Dana 60 taper and requires an 0.875" O.D. hole. Learn More

Front High Steer Kit For 2007-18 Jeep Wrangler JK 2 Door & Unlimited 4 Door Models Learn More

For serious rock crawlers and off-road adventurers, this Heavy Duty Steering Kit is a necessary upgrade. Built to replace your Jeeps entire stock tie rod system, this kit features heavy-duty components that provide the endurance and strength your Jeep needs to dominate the trail ahead. Learn More

These TeraFlex TJ/LJ Heavy-Duty Large Taper Tie Rod Ends utilize a one-ton joint end and a large taper rod end to fit a standard Dana 60 front axle or a Tera CRD60 axle. Learn More

The TeraFlex TJ high steer trackbar kit is designed to be used in conjunction with our high steer kit. This kit will allow you to fine tune the drag link & trackbar angles to eliminate and correct bumpsteer or other front end issues. The kit includes an upper frame bracket, lower axle bracket, and adjustable trackbar. Both brackets feature multiple mounting holes to fine tune for lift height and trackbar position. This kit is designed to put the trackbar parallel with the drag link. This kit... Read More Learn More

Rugged Ridge Inverted Drag Link For 2007+ Jeep Wrangler & Wrangler Unlimited JK NOTE: a 13/16" drill bit required for installation Includes: Drag Link Learn More

Rough Country Steering Box Brace For 1987-95 Jeep Wrangler YJ Learn More

1987-95 YJ Wrangler Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 inch ID steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 inch rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to... Read More Learn More

1984-01 Jeep Cherokee XJ When upgrading to oversize tires the pressures exerted on your steering box increase dramatically, sometimes to the point of ripping the steering box off its mounts! This Rugged Ridge steering box brace will lock that steering box in place under even the most brutal wheeling conditions. Includes mounting hardware. Three (3) Year Limited Warranty. Learn More