Suspension - Builder Parts

Synergy MFG Universal Shock Mount - Perpendicular Bolt 1.75" Mount Radius 1.25" Width For Universal Applications Universal application:Mount Radius: 1.75" Mounting Width: 1.25" Flat shock tab Designed to mount to tubing or axle housings etc. 1/2" Hole 3/16" Hot rolled steel Bolt runs perpendicular with notch Welding required Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy... Read More Learn More

This weldable threaded insert makes custom link building simple and easy. Weld the insert to control arm length tubing. Weldable inserts are available to fit our large (1-1/4” 12 tpi.), medium & small (7/8” 18 tpi.) Monster ends. The large inserts require a minimum of 1.5” ID tubing and the medium/small inserts require a minimum of 1-1/8” ID tubing. Sold Individually. Details: Left hand thread 1.25" insert Requires 1.5" diameter tubing minimum Learn More

9.5" FlexArm Tube Length TeraFlex offers standard lengths of FlexArm tubing pre-tapped for our large Monster ends (1-1/4" x 12tpi threads). These can be used for custom suspension links or torque arms. The DOM tubing is 1.75" OD and .281 wall for superior strength to meet the needs of high power and torque applications. Tube length is measured as the actual length of tube. Learn More

This brake line extension kit includes all hardware to relocate the rear brake lines allowing more rear axle movement without stressing the brake lines. Designed to fit 2007-current Wrangler and Unlimited models including Rubicon. Details: 2007-14 JK Wrangler, Rubicon and Unlimited Rear Sold as a pair Learn More

The BellyUp increases your ground clearance by up to two inches by replacing the factory skid plate with a lower-profile support. The clearance gained with the BellyUp is the equivalent of increasing tire diameter by four inches. The BellyUp is manufactured with 3/16" steel to provide superior protection off-road. Learn More

Warrior Products Torque Barz for Spring Over For 1987-95 Jeep Wrangler YJ Perfect for lifted and modified suspensions, Torque Barz can improve ride ability in both on and off-road conditions. Torque Barz help prevent Leaf spring deformation and possible breakage when climbing grades, under acceleration, or over uneven surfaces, especially when towing heavy loads. The Torque Barz design features a removable interlocking pin that provides maximum suspension travel, simply by removing... Read More Learn More

Front Upper Offset Long Adjustable FlexArm Joint With Right Hand Thread For 2007+ Jeep Wrangler JK 2 Door & Unlimited 4 Door Models Right hand thread 9 degree angle 2" shoulder width 7/8" x 18 TPI shank Accepts 9/16" bolt The TeraFlex JK small FlexArm Joint provides excellent off-road capabilities with articulation and durability. The chrome plated ball provides extreme corrosion resistance and incorporates a smooth sliding surface to reduce bushing friction and heat buildup and extend... Read More Learn More

Synergy MFG 1 5/8" Tie Rod Clamp Kit For 2007+ Jeep Wrangler JK 2 Door & Unlimited 4 Door Models Designed to mount the factory and aftermarket style steering stabilizers on the factory JK tie rod 1.375" tube CNC machined from 1020 DOM material 100% bolt on Zinc plated for corrosion resistance For aftermarket 1-5/8" Tie Rods Only Made in the USA This 100% bolt on Tie Rod Clamp from Synergy Suspension will make mounting a steering stabilizer or steering ram easy, eliminating the need for... Read More Learn More

Synergy MFG 1-1/4" Universal Complete Bushing Kit For Universal Applications Mounting Width: 2.0" Tube OD: 1-1/4" Tube Wall: 0.120" Sleeve OD: 5/8" Bolt Size: 3/8" Made from 1026 DOM tubing Includes inner & outer sleeves Includes bushing halves (part no. SYN4301-125) Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering... Read More Learn More

Synergy MFG 10" Limit Strap For Universal Applications 10" long from center of mounting hole to center of mounting hole Plated end fittings are made from tough 4130 steel and have 1/2" hole U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility Quad wrap (ultra strength) Eyelets have an integrated deflector clip to minimize abrasion Sold individually Made in the USA Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of... Read More Learn More