Auto Rust Technicians

Items 1-10 of 58

Set Descending Direction
per page
Page
  1. Auto Rust Technicians SafeTCap Rear Upper Shock Mount Left or Right Replacement For 1987-95 Jeep Wrangler YJ 123
    SKU: ART-123
    CA$90.95
    Over time, moisture and silt gets trapped inside the frame rails causing severe rust through. These prefabricated replacement parts rebuild the damaged frame sections with no additional metal fabrication required. Learn More
  2. Auto Rust Technicians Center Frame With Rear Trail Arm Mount Repair Kit - Right Side For 2003-06 Jeep Wrangler TJ & Unlimited 131-4-R
    SKU: ART-131-4-R
    CA$659.95
    Auto Rust Full Center Frame With Rear Trail Arm Mount Repair Kit - Right Side 2003-06 Jeep Wrangler TJ/LJ Description: Our Safe-T-Cap frame repair kit is designed for a severely rusted frame on the TJ Wrangler. We have found that the frame starts to rust from the inside out, and can create an unsafe condition. Once the rust process starts, there isn't much that can be done except to cut the rust away, and then install our Safe-T-Cap repair kit. Product Details: Direct replacement ... Read More Learn More
  3. Auto Rust Technicians Rear Upper Coil Spring Mount Set Of Two For 1997-2006 Jeep Wrangler TJ & LJ ART-142-S
    SKU: ART-142-S
    CA$389.95
    SafeTCap ART-142-S is designed to be direct replacements for the original rear upper coil spring mounts on your Jeep TJ and LJ. The spring plate and the frame mount bracket are made from 11 gage cold rolled steel. There is a pre welded 2.5″ long bump stop mount tube included with an m10-1.5 weld nut. The attached frame mount bracket is made to slip over the frame after removing the old spring mount. Learn More
  4. Auto Rust Technicians Rear Axle Track Bar and Trailing Arm Bracket For 1997-06 Jeep Wrangler TJ & TJ Unlimited Models ART-146
    SKU: ART-146
    As low as CA$106.95
    Our SafeTCap ART-146 is a complete replacement for the original track bar and upper trailing arm bracket mounted on the rear axle. This mount was developed to fit a 2.75 diameter axle, but will work on larger diameter axles. The bracket straddles the sway bar bracket which remains in place during installation. The ART-146 is welded directly to the axle once the old bracket is removed and the surface to be welded is prepared. Our ART-146 bracket is made from 7 gage steel, and is CNC cut, bent,... Read More Learn More
  5. Auto Rust Technicians Rear Upper Track Bar Bracket For 1997-06 Jeep Wrangler TJ & TJ Unlimited Models ART-136
    SKU: ART-ART-136
    CA$59.95
    Our SafeTCap ART-136 is a replacement for the OEM rear track bar bracket on the Jeep Wrangler TJ. The bracket is made from 7 gauge HRPO steel, CNC cut, bent and MIG welded in the USA facility. The hardware to remount the track bar is included with the bracket. To install this part you will need to disconnect the track bar and you simply cut off the old mount and weld the new mount in the footprint of the old mount. ATTENTION: The SafeTCap ART-136 is designed as an OEM replacement and is not... Read More Learn More
  6. Auto Rust Technicians Center Frame and Skid Plate Mount Driver Side Replacement For 1987-95 Jeep Wrangler YJ 099-L
    SKU: ART-099-L
    CA$179.95
    Wranglers have weld-nuts inside the frame rails that secure the transfer case skid plate in place. The skid plate also is the transmission and transfer case mount. Typically the bolts are a problem to remove due to rust on the inside of the frame rail. When this happens, access holes are often cut unto the side to facilitate removal of these bolts. This method gives access to dirt and water, which can collect inside the rails and rust them from the inside out. This Safe-T-CapTM kit is a... Read More Learn More
  7. Auto Rust Technicians Rear Upper Trail Arm Mount Driver Side For 1997-06 Jeep Wrangler TJ 127-L
    SKU: ART-127-L
    CA$119.95
    Rear Upper Trailing Arm Mount Replacement, Left (Driver) Side. Fits 1997-2006 Jeep Wrangler TJ. Our replacement mount is made from Heavy Duty 7 Gauge Steel, CNC Cut and Welded by our Certified Welders! The original factory mount is made from thinner material, making it susceptible to rusting out and tearing away from the frame. The part includes a new high grade bolt and nut welded in place. Learn More
  8. Auto Rust Technicians Frame Section at Fuel Tank Driver Side For 1966-87 Jeep Full Size 043-L
    SKU: ART-043-L
    CA$259.95
    Fits 1966-87 Grand Wagoneer The fuel tank skid plate collects and traps dirt and debris. Eventually this will create a rusty frame problem where the fuel tank skid plate attaches to the frame. Once the frame starts rusting away, there is no way to hold the skid plate and fuel tank securely. This frame repair kit will solve the problem. Once the tank and skid plates are removed, you test fit the kit and mark off where it covers, then simply cut away the rust and install the three-piece kit.... Read More Learn More
  9. Auto Rust Technicians Front Frame Rear Section For Main Eye Spring Mount Replacement Both Sides For 1987-95 Jeep Wrangler YJ 111-S
    SKU: ART-111-S
    CA$429.95
    This kit is designed to repair the front frame section where the leaf spring perch is mounted. This is behind the front axle. The front kit is ART-102. The frame in this area seems to trap a lot of dirt, road debris, and mud, as well as water is able to get inside the boxed frame. Once its trapped it starts to rust from the inside out, and can fail before you even know you have a problem. Our repair kit is manufactured from precision CNC cut sections of heavy guage steel, and includes a new... Read More Learn More
  10. Auto Rust Technicians Front Mount Section of Rear Spring Passenger Side Replacement For 1967-86 Jeep CJ5 & CJ7 081-R
    SKU: ART-081-R
    CA$219.95
    The CJ’s rear leaf spring mounting point has a factory rubber body mount above it that often leads to deterioration of the frame area. Over time, moisture gets trapped around the leaf spring bushings while dirt and debris get trapped inside the frame rails causing severe rust-through. Cut out the old mount and cut back the rust, then cover with the Safe-T-CapTM and weld in place – you’re back on the road without an expensive full frame replacement. You will need to buy new leaf spring... Read More Learn More

Items 1-10 of 58

Set Descending Direction
per page
Page