Alloy USA Rear Driver Side 30 Spline Performance Axleshaft For 1990-06 Jeep Wrangler YJ, TJ Models & Cherokee XJ With Dana 35 Axle & Aftermarket 30 Spline Differential (C-Clip) 21111
SKU
ALY-21111
We Price Match
- Manufacturer: Alloy USA
- Part: Differential - Axle Shafts & Kits
Alloy USA Rear Driver Side 30 Spline Performance Axleshaft
1990-06 Jeep Wrangler YJ, TJ Models & Cherokee XJ With Dana 35 Axle & Aftermarket 30 Spline Differential (C-Clip)
Alloy USA Chromoly Replacement Axle Shaft
Dana 35
30 Spline
5 on 4.5in. Bolt Pattern
Driver Side
30.625 Overall Length
Does NOT Include Bearings Seals Or Studs
For Use In 90-06 C Clip
Requires Use Of After Market 30 Spline Differential
Don’t just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
Fits These Vehicles:
90-95 Jeep Wrangler (YJ)
97-06 Jeep Wrangler (TJ)
90-01 Jeep Cherokee (XJ)
Original Alloy USA Part 21111
1990-06 Jeep Wrangler YJ, TJ Models & Cherokee XJ With Dana 35 Axle & Aftermarket 30 Spline Differential (C-Clip)
Alloy USA Chromoly Replacement Axle Shaft
Dana 35
30 Spline
5 on 4.5in. Bolt Pattern
Driver Side
30.625 Overall Length
Does NOT Include Bearings Seals Or Studs
For Use In 90-06 C Clip
Requires Use Of After Market 30 Spline Differential
Don’t just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
Fits These Vehicles:
90-95 Jeep Wrangler (YJ)
97-06 Jeep Wrangler (TJ)
90-01 Jeep Cherokee (XJ)
Original Alloy USA Part 21111
Special Price $210.76 Regular Price $247.95
Alloy USA 21111
Alloy USA Rear Driver Side 30 Spline Performance Axleshaft
1990-06 Jeep Wrangler YJ, TJ Models & Cherokee XJ With Dana 35 Axle & Aftermarket 30 Spline Differential (C-Clip)
Alloy USA Chromoly Replacement Axle Shaft
Dana 35
30 Spline
5 on 4.5in. Bolt Pattern
Driver Side
30.625 Overall Length
Does NOT Include Bearings Seals Or Studs
For Use In 90-06 C Clip
Requires Use Of After Market 30 Spline Differential
Don’t just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
Fits These Vehicles:
90-95 Jeep Wrangler (YJ)
97-06 Jeep Wrangler (TJ)
90-01 Jeep Cherokee (XJ)
Original Alloy USA Part 21111
Alloy USA Rear Driver Side 30 Spline Performance Axleshaft
1990-06 Jeep Wrangler YJ, TJ Models & Cherokee XJ With Dana 35 Axle & Aftermarket 30 Spline Differential (C-Clip)
Alloy USA Chromoly Replacement Axle Shaft
Dana 35
30 Spline
5 on 4.5in. Bolt Pattern
Driver Side
30.625 Overall Length
Does NOT Include Bearings Seals Or Studs
For Use In 90-06 C Clip
Requires Use Of After Market 30 Spline Differential
Don’t just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
Fits These Vehicles:
90-95 Jeep Wrangler (YJ)
97-06 Jeep Wrangler (TJ)
90-01 Jeep Cherokee (XJ)
Original Alloy USA Part 21111
| Manufacturer | Alloy USA |
|---|---|
| Searchable Sku | 21111 |
